Sharp AR-C160 manual KEY Operator Programs

KEY OPERATOR PROGRAMS

Category	Program Name	Function	Page No.
	Transfer Belt Position	Switches the transfer belt to either the B/W side or	21
		the color side.
	Initial Color Balance	Sets the initial color balance settings.	22
	Setting
	Size Setting for	Sets a paper size in each tray with [EXTRA] setting.	22
	[EXTRA]
	Require Key	Prevents the copier from being started by people	23
	Operator Code	other than key operator.
	Stream Feeding	Enables the stream feeding mode for copying	24
	Mode	from the optional document feeder.
	Override Sorter Bin	Cancels limit control of operation in case of bin	24
	Capacity Limit	capacity overflow of an optional staple sorter.
Timer Settings	Sleep Mode	Sets a time interval after which the copier enters the	25
	Setting	sleep mode after copying is completed.
	Auto Clear Setting	Sets a time interval after which the copier returns	25
		to the initial settings.
	Preheat Mode	Sets the time that elapses before the copier enters	26
	Setting	the preheat mode after copying is completed.
	Message Time	Sets the length of time that messages are displayed.	26
	Setting
Enable/Disable	Disabling of Beep	Enables or disables sounding of beep when keys	27
Settings	When Keys Touched	are touched.
	Disabling of Auto	Prevents automatic paper selection.	27
	Paper Selection
	Disabling of Auto	Prevents automatic switching between the paper	27
	Tray Switching	trays.
	Disabling of	Prohibits the use of the bypass tray during	28
	Bypass-Tray	duplex copying. (Duplex copying can be performed
	in Duplex Copy	when an optional duplex module is installed.)
	Disabling	Prevents stored programs from being replaced or	28
	Deletion of Job	deleted.
	Programs
	Disabling of	Prevents the use of the optional document feeder	28
	Document Feeder	when it malfunctions.
	Disabling of Duplex	Temporarily prevents the optional duplex system from	28
	Copying	operating when it malfunctions. Allows the use of the
		copier but not the duplex system.

5