Sharp AR-NB3 Using the KEY Operator Programs, Basic Procedure for Configuring Settings

USING THE KEY OPERATOR PROGRAMS

BASIC PROCEDURE FOR CONFIGURING SETTINGS

Follow the steps below to access the key operator settings for the network and printer functions.

1 Press the [SPECIAL FUNCTION] key.

	The special function screen
DUPLEX	will appear.
	SPECIAL FUNCTION
DUPLEX SCAN
DUPLEX SCAN	ACC.

2 Select "KEY OPERATOR PRG." with the [] or [] key.

	GH	SPECIAL			FUNCTION
	PQR	PAPER		SIZE SET
		DISPLAY			CONTRAST
DUPLEX		TOTAL		COUNT
SPECIAL FUNCTION
DUPLEX SCAN		KEY	OPERATOR PRG.
3 Press the [OK] key.
		Enter	key		operator
BACK OK		code.

GHI	KEY OPERATOR CODE:
The key operator code	-----
entry screen will appear.

6 Press the [OK] key.

OK	PRINTER
		NOTICE	PAGE
		FORCED	OUTPUT OF
		PRINT
The settings of the		OUTPUT	TRAYS
selected mode will
appear.

Example: The above screen shows the settings when printer mode is selected.

7 Select the desired program with the [] or [] key.

•A checkbox appears to the left of several of the programs. To enable a function (make a checkmark appear), press the [OK] key. To cancel a selection, press the [OK] key once again to remove the checkmark and disable the function. Go to step 9.

•When the [OK] key is pressed for a program that does not have a checkbox, the settings for the program appear.

4 Use the numeric keys to enter the key operator code.

OK	ABC	DEF	MODE	SELECT
GHI	JKL	MNO	KEY	OP. # CHANGE
PQRS	TUV	WXYZ	COPIER
FUNCTION		@.-_	PRINTER
ACC. #-C		READ-END	SCANNER

•" " will appear for each digit entered.

•The mode selection screen will appear.

5 Select the desired mode with the [ ] or [] key.

8 Press the [OK] key and follow the instructions in the program screen.

OK

9 To use another program for the same mode, select the desired program with the [] or [] key.

To use a program for a different mode, press the [BACK] key and select the desired mode. To exit the key operator programs, press the [CA] key

( ).

MODE SELECT

KEY OP. # CHANGE COPIER PRINTER

SCANNER

32