PART NAMES AND FUNCTIONS
EXTERIOR
(1)
(2) | (3) (4) | (5) | (6) |
(7)
When a finisher / saddle stitch finisher is not installed
(8)
When a finisher is installed
(1) Document cover* | (5) Operation panel |
Place an original on the document glass and close the document cover before copying starts.
This is used to select functions and enter the number of copies.
(2)Automatic document feeder*
This automatically feeds and scans multiple originals. Both sides of
(3)Front cover
Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge.
(4)Paper pass unit*
This transfers output to the finisher (large stacker) or saddle stitch finisher.
(6)Exit tray unit (right tray)*
When installed, output can be delivered to this tray.
(7)Output tray (centre tray) Output is delivered to this tray.
(8)Finisher*
This can be used to staple output. A punch module can also be installed to punch holes in output.
* Peripheral device.
11