Sharp MX-M502N, MX-M282N, MX-M362N, MX-M452N Regular Maintenance, Document glass, Scanning area

Page 36

MAINTENANCE

This section explains how to clean the machine and replace the toner cartridges and the toner collection container.

REGULAR MAINTENANCE

To ensure that the machine continues to provide top quality performance, periodically clean the machine.

Warning

Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical components or the fusing unit inside the machine, fire or electrical shock may result.

• Do not use thinner, benzene, or similar volatile cleaning agents to clean the machine. These may degrade or discolour the housing.

• Use a soft cloth to gently wipe off dirt from the area on the operation panel with a mirror-like finish (shown at right). If you use a stiff cloth or rub hard, the surface may be damaged.

The area with a mirror-like finish is

the area that is

 

.

 

 

 

CLEANING THE DOCUMENT GLASS AND AUTOMATIC DOCUMENT FEEDER

If the document glass or document backplate sheet becomes dirty, the dirt will appear in the scanned image. Always keep these parts clean.

Wipe the parts with a clean, soft cloth.

If necessary, moisten the cloth with water or a small amount of neutral detergent. After wiping with the moistened cloth, wipe the parts dry with a clean dry cloth.

Document glass

Document backplate sheet

Scanning area

Examples of lines in the image

If black or white lines appear in images scanned using the automatic document feeder, clean the scanning area (the thin long glass next to the document glass).

To clean this area, use the glass cleaner that is stored in the automatic document feeder. After using the glass cleaner, be sure to return it to its storage position.

Black lines

White lines

34

Image 36
Contents Start Guide MX-M362N MX-M452N MX-M502NEMC this machine and peripheral devices GREEN-AND-YELLOW EarthNeutral LiveWarranty Software LicenceFor the users of the fax function FAX interface cable and Line cableContents Symbols in this manual Power notesDo not damage or modify the power cord Do not insert or remove the power plug with wet handsInstallation notes Do not install in a location with moisture or dustLocations exposed to direct sunlight Locations with ammonia gasAbout consumables Near a wallLocations subject to vibration Handling precautions Do not use a flammable spray to clean the machineDo not remove the machine casing Do not make any modifications to this machineSafety Precautions Laser informationConvenient methods for using the Operation Guide Printed manuals Start GuideOperation Guide Access the Web server in the machine to Opening the Web pagesDownloading the Operation Guide Open the Web pagesPress the System Settings key Select the all custom setting list in the touch panelChecking the IP Address Part Names and Functions ExteriorUSB connector a type Supports USB 2.0 Hi-Speed Punch moduleSaddle stitch finisher Finisher large stackerInterior Automatic Document Feeder and Document Glass When the fax expansion kit is installed LAN connectorUSB connector B type Supports USB 2.0 Hi-Speed Side and BackImage send indicators Touch panel JOB Status key Print mode indicatorsSystem Settings key Operation PanelMain power indicator Power keyPower Save key Numeric keysTurning the Power on and OFF Main power switch Power keyMain power indicator Power key Using the automatic document feeder Using the document glassPlacing Originals Place the originals face up with the edges aligned evenlyUseable Paper Plain paper, special mediaTypes of paper that can be used in each tray Plain paper that can be usedTrays 1 to Bypass tray and trayLoading Paper in a Tray Names of the traysLoading paper in a tray Changing the tray settings Configure the tray settings in the touch panelLoading paper in other trays Bypass trayExample Loading an envelope Large capacity tray Before Installing the Software CD-ROMS and SoftwarePCL6 printer driver PS printer driver Sharpdesk/Network Scanner Utilities CD-ROM for Windows Verifying System Requirements Windows*1 Macintosh*4For users of Mac OS 9.0 to 9.2.2/X10.2.8/X10.3.9 Connecting the Machine Connecting the Machine with a USB Cable WindowsSetup in a Windows Environment Double-click the Setup iconOpening the Software Selection Screen for ALL Software Insert the Software CD-ROM into your computers CD-ROM driveInstalling the Printer Driver / PC-FAX Driver Click the Printer Driver buttonIf the machine is connected to an IPv6-only network Click the Standard installation button This completes the installation Window confirming installation of the display fontsFollow the on-screen instructions Printer name windowMaintenance Regular MaintenanceDocument glass Scanning areaCleaning the Bypass Feed Roller Copy mode Replacing the Toner CartridgesPull the toner cartridge toward you Open the front coverClose the front cover Replacing the Toner Collection Container Remove the toner collection containerPlug the hole in the toner collection Replacing the Stamp Cartridge Open the holders two on the left and right sidesInstall a new stamp cartridge Push the stamp unit back Removing Misfeeds Misfeed locationSupplies Storage of suppliesSupply of spare parts and consumables Specifications Machine specifications / copier specificationsRequired power supply Power consumptionDimensions WeightContinuous copying speeds Ambient environmentReversing single feeder specifications MX-RP11 Exit tray unit right tray specificationsAcoustic noise emission measurement according to ISO7779 Page To the Administrator of the Machine Factory default passwordsFactory default administrator password Factory default passwords Web pagesImportant safety instructions Information on Disposal Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionTrademark acknowledgments Sharp Electronics Europe GmbHMX-M282N/MX-M362N/MX-M452N/MX-M502N Start Guide