Sharp MX-M282N, MX-M502N, MX-M362N, MX-M452N manual Continuous copying speeds, Ambient environment

Page 49

SPECIFICATIONS

Continuous copying speeds*

Model

MX-M282N

MX-M362N

MX-M452N

MX-M502N

Copy ratio

 

100% / Reduced / Enlarged

 

A3, 11" x 17", 8K

15 copies/min.

17 copies/min.

20 copies/min.

22 copies/min.

B4, 8-1/2" x 14", 8-1/2" x 13-1/2",

17 copies/min.

20 copies/min.

23 copies/min.

25 copies/min.

8-1/2" x 13-2/5", 8-1/2" x 13"

 

 

 

 

A4, B5, 8-1/2" x 11", 16K

28 copies/min.

36 copies/min.

45 copies/min.

50 copies/min.

A4R, B5R, 8-1/2" x 11"R,

20 copies/min.

25 copies/min.

30 copies/min.

30 copies/min.

7-1/4" x 10-1/2"R, 16KR

 

 

 

 

 

 

 

 

 

*Copy speed during output of the second copy and following copies when performing continuous one-sided copying of the same page (excluding offset output) using plain one-sided paper from a tray other than the bypass tray.

Ambient environment

(Humidity)

85%

60%

20%

10°C

30°C 35°C (Temperature)

(54°F)

(86°F) (91°F)

Chemical emission (measured according to RAL UZ-122: Edition Jan. 2006)

Ozone

Dust

Styrene

Benzene

TVOC

1.5mg/h or less

4.0mg/h or less

1.0mg/h or less

less than 0.05 mg/h 10 mg/h or less

47

Image 49
Contents MX-M362N MX-M452N MX-M502N Start GuideGREEN-AND-YELLOW Earth EMC this machine and peripheral devicesNeutral LiveSoftware Licence WarrantyFor the users of the fax function FAX interface cable and Line cableContents Power notes Symbols in this manualDo not damage or modify the power cord Do not insert or remove the power plug with wet handsDo not install in a location with moisture or dust Installation notesLocations exposed to direct sunlight Locations with ammonia gasNear a wall About consumablesLocations subject to vibration Do not use a flammable spray to clean the machine Handling precautionsDo not remove the machine casing Do not make any modifications to this machineLaser information Safety PrecautionsPrinted manuals Start Guide Convenient methods for using the Operation GuideOperation Guide Opening the Web pages Access the Web server in the machine toDownloading the Operation Guide Open the Web pagesSelect the all custom setting list in the touch panel Press the System Settings keyChecking the IP Address Exterior Part Names and FunctionsPunch module USB connector a type Supports USB 2.0 Hi-SpeedSaddle stitch finisher Finisher large stackerInterior Automatic Document Feeder and Document Glass LAN connector When the fax expansion kit is installedUSB connector B type Supports USB 2.0 Hi-Speed Side and BackTouch panel JOB Status key Print mode indicators Image send indicatorsSystem Settings key Operation PanelPower key Main power indicatorPower Save key Numeric keysMain power switch Power key Turning the Power on and OFFMain power indicator Power key Using the document glass Using the automatic document feederPlacing Originals Place the originals face up with the edges aligned evenlyPlain paper, special media Useable PaperTypes of paper that can be used in each tray Plain paper that can be usedBypass tray and tray Trays 1 toNames of the trays Loading Paper in a TrayLoading paper in a tray Configure the tray settings in the touch panel Changing the tray settingsBypass tray Loading paper in other traysExample Loading an envelope Large capacity tray CD-ROMS and Software Before Installing the SoftwarePCL6 printer driver PS printer driver Sharpdesk/Network Scanner Utilities CD-ROM for Windows Windows*1 Macintosh*4 Verifying System RequirementsFor users of Mac OS 9.0 to 9.2.2/X10.2.8/X10.3.9 Connecting the Machine with a USB Cable Windows Connecting the MachineDouble-click the Setup icon Setup in a Windows EnvironmentOpening the Software Selection Screen for ALL Software Insert the Software CD-ROM into your computers CD-ROM driveClick the Printer Driver button Installing the Printer Driver / PC-FAX DriverIf the machine is connected to an IPv6-only network Click the Standard installation button Window confirming installation of the display fonts This completes the installationFollow the on-screen instructions Printer name windowRegular Maintenance MaintenanceDocument glass Scanning areaCleaning the Bypass Feed Roller Replacing the Toner Cartridges Copy modeOpen the front cover Pull the toner cartridge toward youClose the front cover Remove the toner collection container Replacing the Toner Collection ContainerPlug the hole in the toner collection Open the holders two on the left and right sides Replacing the Stamp CartridgeInstall a new stamp cartridge Push the stamp unit back Misfeed location Removing MisfeedsStorage of supplies SuppliesSupply of spare parts and consumables Machine specifications / copier specifications SpecificationsPower consumption Required power supplyDimensions WeightAmbient environment Continuous copying speedsExit tray unit right tray specifications Reversing single feeder specifications MX-RP11Acoustic noise emission measurement according to ISO7779 Page Factory default passwords To the Administrator of the MachineFactory default administrator password Factory default passwords Web pagesImportant safety instructions Information on Disposal for Users private households Information on DisposalInformation on Disposal for Business Users European UnionSharp Electronics Europe GmbH Trademark acknowledgmentsMX-M282N/MX-M362N/MX-M452N/MX-M502N Start Guide