SPECIFICATIONS
Machine specifications / copier specifications (Continued)
| Paper sizes: A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", | ||
| |||
| |||
| detection function. Entry of paper sizes up to 297 mm x 432 mm | ||
| possible.) |
| |
| Paper weights: |
| |
Bypass tray | Thin paper (56 g/m2 to 59 g/m2 (15 lbs. to 16 lbs.)), plain paper (60 g/m2 to 105 g/m2 (16 lbs. to | ||
| 28 lbs.)), heavy paper (106 g/m2 to 209 g/m2 (28 lbs. bond to 110 lbs. index)), | ||
| envelopes (75 g/m2 to 90 g/m2 (20 lbs. to 24 lbs.)) | ||
| Paper capacity: Standard paper 100 sheets | ||
| Paper types: |
| |
| |||
| transparency film, labels, tab paper, envelopes (Monarch, | ||
| Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", | ||
Duplex module | |||
Paper weight: Plain paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.)), heavy paper (106 g/m2 to | |||
| 209 g/m2 (28 lbs. bond to 110 lbs. index)) | ||
| Paper types: | ||
| Output method: | ||
| saddle stitch finisher) |
| |
1 | Output capacity: 400 sheets (using | ||
Output tray (Centre tray)* | (The maximum number of sheets that can be held varies depending on ambient conditions in the | ||
| installation location, the type of paper, and the storage conditions of the paper.) | ||
| Tray full sensor: Yes |
| |
| LAN connectivity: | ||
| USB connectivity: Type A connector supports USB 2.0*2 | ||
Interface port | Compatibility requirements of USB memory | ||
Memory capacity : Max. 32 GB | |||
| |||
| Disk Format | : FAT32 only | |
| Type B connector supports USB 2.0 (Hi speed) | ||
Required power supply | Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of | ||
the left side of the machine.) |
| ||
|
| ||
Power consumption | 1.84 kW | ||
| 645 mm (W) x 695 mm (D) x 953 mm (H) | ||
Dimensions | reversing single pass feeder installed) |
| |
645 mm (W) x 695 mm (D) x 833 mm (H) | |||
| |||
| document cover installed) |
| |
Weight | Approx. 95 kg (209.4 lbs.) (With the reversing single pass feeder installed) | ||
Approx. 88 kg (194.0 lbs.) (With the document cover installed) | |||
| |||
Overall dimensions | 986 mm (W) x 695 mm (D) | ||
|
|
|
*1 Output tray (Centre tray) cannot be used when the finisher or saddle stitch finisher is installed.
*2 Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two connectors).
Do not use the connectors simultaneously.
When a keyboard is not connected
To receive power supplied from a type A connector, the total current consumption of the connected device should not exceed 500 mA.
46