Sharp MX-M452N, MX-M502N, MX-M282N, MX-M362N manual Interior

PART NAMES AND FUNCTIONS

INTERIOR

(18) (19) (20)

(23) (24) (25) (26) (27) (28)

(21) (22)

(18)Toner cartridges

These contain toner for printing. When the toner runs out in the cartridge, replace the cartridge with a new cartridge.

(19)Fusing unit

Heat is applied here to fuse the transferred image onto the paper.

Caution

The fusing unit is hot. Take care not to burn yourself when removing a paper misfeed.

(20)Right side cover

Open this cover to remove a misfeed.

(21)Paper reversing section cover

This is used when 2-sided printing is performed. Open this cover to remove a paper misfeed.

(22)Bypass tray

Use this tray to feed paper manually.

When loading paper larger than A4R or 8-1/2" x 11"R, be sure to pull out the bypass tray extension.

(23)Main power switch

This is used to power on the machine.

When using the fax or Internet fax functions, keep this switch in the "on" position.

(24)Toner collection container

This collects excess toner that remains after printing.

Your service technician will collect the toner collection container.

(25)Handle

Pull this out and grasp it when moving the machine.

(26)Right cover of stand/1 x 500 sheet paper drawer Right cover of stand/2 x 500 sheet paper drawer (when a stand/1 x 500 sheet paper drawer or a stand/2 x 500 sheet paper drawer is installed) Open this to remove a paper misfeed in tray 3 or tray 4.

(27)Paper tray right side cover

Open this to remove a paper misfeed in tray 1 or tray 2.

(28)Right side cover release lever

To remove a paper misfeed, pull and hold this lever up to open the right side cover.

13