Sharp MX-M282N Symbols in this manual, Power notes, Do not damage or modify the power cord

Page 5

CAUTIONS

Symbols in this manual

To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand the meaning of the symbols when reading the manual.

 

Symbol

 

 

 

Meaning

 

 

 

WARNING

Indicates a risk of death or serious injury.

 

 

 

 

 

 

 

 

 

 

CAUTION

Indicates a risk of human injury or property damage.

 

 

 

 

 

 

 

 

 

 

Meaning of the symbols

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Symbol

Meaning

 

 

Symbol

Meaning

 

Symbol

Meaning

 

CAUTION!

 

 

 

PROHIBITED ACTIONS

 

 

MANDATORY ACTIONS

 

HOT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PINCH POINT

 

 

 

DO NOT

 

 

 

 

KEEP CLEAR

 

 

 

DISASSEMBLE

 

 

 

 

 

 

 

 

 

 

 

 

Power notes

WARNING

Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. Do not use an extension cord or adapter to connect other devices to the power outlet used by the machine. Using an improper power supply may cause fire or electrical shock.

*For the power supply requirements, see the name plate in the lower left corner of the left side of the machine.

Do not damage or modify the power cord.

Placing heavy objects on the power cord, pulling it, or forcibly bending it will damage the cord, resulting in fire or electrical shock.

Do not insert or remove the power plug with wet hands.

This may cause electrical shock.

CAUTION

When removing the power plug from the outlet, do not pull on the cord.

Pulling on the cord may cause damage such as wire exposure and breakage, and may result in fire or electrical shock.

If you will not use the machine for a long time, be sure to remove the power plug from the outlet for safety.

When moving the machine, switch off the main power and remove the power plug from the outlet before moving.

The cord may be damaged, creating a risk of fire or electrical shock.

3

Image 5
Contents MX-M362N MX-M452N MX-M502N Start Guide GREEN-AND-YELLOW Earth EMC this machine and peripheral devices Neutral LiveSoftware Licence WarrantyFor the users of the fax function FAX interface cable and Line cableContents Power notes Symbols in this manualDo not damage or modify the power cord Do not insert or remove the power plug with wet handsDo not install in a location with moisture or dust Installation notesLocations exposed to direct sunlight Locations with ammonia gasLocations subject to vibration About consumablesNear a wall Do not use a flammable spray to clean the machine Handling precautionsDo not remove the machine casing Do not make any modifications to this machineLaser information Safety PrecautionsOperation Guide Convenient methods for using the Operation GuidePrinted manuals Start Guide Opening the Web pages Access the Web server in the machine toDownloading the Operation Guide Open the Web pagesChecking the IP Address Press the System Settings keySelect the all custom setting list in the touch panel Exterior Part Names and FunctionsPunch module USB connector a type Supports USB 2.0 Hi-SpeedSaddle stitch finisher Finisher large stackerInterior Automatic Document Feeder and Document Glass LAN connector When the fax expansion kit is installedUSB connector B type Supports USB 2.0 Hi-Speed Side and BackTouch panel JOB Status key Print mode indicators Image send indicatorsSystem Settings key Operation PanelPower key Main power indicatorPower Save key Numeric keysMain power indicator Power key Turning the Power on and OFFMain power switch Power key Using the document glass Using the automatic document feederPlacing Originals Place the originals face up with the edges aligned evenlyPlain paper, special media Useable PaperTypes of paper that can be used in each tray Plain paper that can be usedBypass tray and tray Trays 1 toLoading paper in a tray Loading Paper in a TrayNames of the trays Configure the tray settings in the touch panel Changing the tray settingsExample Loading an envelope Loading paper in other traysBypass tray Large capacity tray CD-ROMS and Software Before Installing the SoftwarePCL6 printer driver PS printer driver Sharpdesk/Network Scanner Utilities CD-ROM for Windows For users of Mac OS 9.0 to 9.2.2/X10.2.8/X10.3.9 Verifying System RequirementsWindows*1 Macintosh*4 Connecting the Machine with a USB Cable Windows Connecting the MachineDouble-click the Setup icon Setup in a Windows EnvironmentOpening the Software Selection Screen for ALL Software Insert the Software CD-ROM into your computers CD-ROM driveIf the machine is connected to an IPv6-only network Installing the Printer Driver / PC-FAX DriverClick the Printer Driver button Click the Standard installation button Window confirming installation of the display fonts This completes the installationFollow the on-screen instructions Printer name windowRegular Maintenance MaintenanceDocument glass Scanning areaCleaning the Bypass Feed Roller Replacing the Toner Cartridges Copy modeOpen the front cover Pull the toner cartridge toward youClose the front cover Remove the toner collection container Replacing the Toner Collection ContainerPlug the hole in the toner collection Open the holders two on the left and right sides Replacing the Stamp CartridgeInstall a new stamp cartridge Push the stamp unit back Misfeed location Removing MisfeedsSupply of spare parts and consumables SuppliesStorage of supplies Machine specifications / copier specifications SpecificationsPower consumption Required power supplyDimensions WeightAmbient environment Continuous copying speedsAcoustic noise emission measurement according to ISO7779 Reversing single feeder specifications MX-RP11Exit tray unit right tray specifications Page Factory default passwords To the Administrator of the MachineFactory default administrator password Factory default passwords Web pagesImportant safety instructions Information on Disposal for Users private households Information on DisposalInformation on Disposal for Business Users European UnionSharp Electronics Europe GmbH Trademark acknowledgmentsMX-M282N/MX-M362N/MX-M452N/MX-M502N Start Guide