Sharp MX-M362N, MX-M502N Useable Paper, Plain paper, special media, Plain paper that can be used

Page 22

PLACING ORIGINALS

USEABLE PAPER

Various types of paper are sold. This section explains what plain paper and what special media can be used with the machine. For detailed information on the sizes and types of paper that can be loaded in each tray of the machine, see the specifications in this manual and "Paper Tray Settings" in "7. SYSTEM SETTINGS" of the Operation Guide.

Plain paper, special media

Plain paper that can be used

SHARP standard plain paper (80 g/m2 (21 lbs.)). For paper specifications, see the specifications in this manual.

Pain paper other than SHARP standard paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.))

Recycled paper, coloured paper and pre-punched paper must meet the same specifications as plain paper. Contact your dealer or nearest authorised service representative for advice on using these types of paper.

Types of paper that can be used in each tray

The following types of paper can be loaded in each tray.

 

 

Tray 1/Tray 2

Tray 3/Tray 4

Bypass tray

Tray 5 (large capacity

 

 

tray)

 

 

 

 

 

 

 

 

 

 

Plain paper

Permitted

Permitted

Permitted

Permitted

 

 

 

 

 

Pre-printed

Permitted

Permitted

Permitted

Permitted

 

 

 

 

 

Recycle Paper

Permitted

Permitted

Permitted

Permitted

 

 

 

 

 

Letter head

Permitted

Permitted

Permitted

Permitted

 

 

 

 

 

Pre-punched

Permitted

Permitted

Permitted

Permitted

 

 

 

 

 

Colour

Permitted

Permitted

Permitted

Permitted

 

 

 

 

 

Heavy paper *1

Permitted

Permitted

Permitted

Labels

Permitted

 

 

 

 

 

Transparency film

Permitted

 

 

 

 

 

Tab paper

Permitted

 

 

 

 

 

Envelopes

Permitted

 

 

 

 

 

Thin paper*2

Permitted

*1

Heavy paper up to 209 g/m2 (110 lbs.) can be used.

 

 

 

*2

Thin paper from 56 g/m2 to 59 g/m2 (15 lbs. to 16 lbs.) can be used.

 

 

20

Image 22
Contents Start Guide MX-M362N MX-M452N MX-M502NNeutral EMC this machine and peripheral devicesGREEN-AND-YELLOW Earth LiveFor the users of the fax function WarrantySoftware Licence FAX interface cable and Line cableContents Do not damage or modify the power cord Symbols in this manualPower notes Do not insert or remove the power plug with wet handsLocations exposed to direct sunlight Installation notesDo not install in a location with moisture or dust Locations with ammonia gasNear a wall About consumablesLocations subject to vibration Do not remove the machine casing Handling precautionsDo not use a flammable spray to clean the machine Do not make any modifications to this machineSafety Precautions Laser informationPrinted manuals Start Guide Convenient methods for using the Operation GuideOperation Guide Downloading the Operation Guide Access the Web server in the machine toOpening the Web pages Open the Web pagesSelect the all custom setting list in the touch panel Press the System Settings keyChecking the IP Address Part Names and Functions ExteriorSaddle stitch finisher USB connector a type Supports USB 2.0 Hi-SpeedPunch module Finisher large stackerInterior Automatic Document Feeder and Document Glass USB connector B type Supports USB 2.0 Hi-Speed When the fax expansion kit is installedLAN connector Side and BackSystem Settings key Image send indicatorsTouch panel JOB Status key Print mode indicators Operation PanelPower Save key Main power indicatorPower key Numeric keysMain power switch Power key Turning the Power on and OFFMain power indicator Power key Placing Originals Using the automatic document feederUsing the document glass Place the originals face up with the edges aligned evenlyTypes of paper that can be used in each tray Useable PaperPlain paper, special media Plain paper that can be usedTrays 1 to Bypass tray and trayNames of the trays Loading Paper in a TrayLoading paper in a tray Changing the tray settings Configure the tray settings in the touch panelBypass tray Loading paper in other traysExample Loading an envelope Large capacity tray PCL6 printer driver Before Installing the SoftwareCD-ROMS and Software PS printer driver Sharpdesk/Network Scanner Utilities CD-ROM for Windows Windows*1 Macintosh*4 Verifying System RequirementsFor users of Mac OS 9.0 to 9.2.2/X10.2.8/X10.3.9 Connecting the Machine Connecting the Machine with a USB Cable WindowsOpening the Software Selection Screen for ALL Software Setup in a Windows EnvironmentDouble-click the Setup icon Insert the Software CD-ROM into your computers CD-ROM driveClick the Printer Driver button Installing the Printer Driver / PC-FAX DriverIf the machine is connected to an IPv6-only network Click the Standard installation button Follow the on-screen instructions This completes the installationWindow confirming installation of the display fonts Printer name windowDocument glass MaintenanceRegular Maintenance Scanning areaCleaning the Bypass Feed Roller Copy mode Replacing the Toner CartridgesPull the toner cartridge toward you Open the front coverClose the front cover Replacing the Toner Collection Container Remove the toner collection containerPlug the hole in the toner collection Replacing the Stamp Cartridge Open the holders two on the left and right sidesInstall a new stamp cartridge Push the stamp unit back Removing Misfeeds Misfeed locationStorage of supplies SuppliesSupply of spare parts and consumables Specifications Machine specifications / copier specificationsDimensions Required power supplyPower consumption WeightContinuous copying speeds Ambient environmentExit tray unit right tray specifications Reversing single feeder specifications MX-RP11Acoustic noise emission measurement according to ISO7779 Page Factory default administrator password To the Administrator of the MachineFactory default passwords Factory default passwords Web pagesImportant safety instructions Information on Disposal for Business Users Information on DisposalInformation on Disposal for Users private households European UnionTrademark acknowledgments Sharp Electronics Europe GmbHMX-M282N/MX-M362N/MX-M452N/MX-M502N Start Guide