Sharp PNA601, PN-A601 operation manual 13 E, Connecting Peripheral Equipment, Example connection

Page 13

(Example connection)

First monitor

Second monitor

 

 

 

PC/AV DVI-D

PC/AV DVI-D

PC/AV DVI-D

input terminal

output terminal

input terminal

Digital signal (DVI) cables

(commercially available)

To PC digital RGB output terminal

shows the signal flow

TIPS

•The length of the signal cables or surrounding environment may affect the image quality.

•The screen may not display properly when using terminals other than PC DVI-D/AV DVI-D for the input mode. In this case, turn off the power to all the monitors connected in a daisy chain and then turn the power on again.

•When connecting monitors in a daisy chain set AUTO INPUT CHANGE to OFF.

•Video output is disabled in the following cases: When the power is turned off

When the monitor is in input signal waiting mode

10. LAN terminal

•You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network.

11. External speaker terminals

•Be sure to use external speakers with an impedance of 6 Ω or greater and a rated input of at least 10 W.

1

2

3

 

Approx.

 

 

3-15/16 inch

 

 

(10 cm)

 

1.Attach a speaker cable core (included with the PN-ZB01) to the end of the speaker cable connected to the monitor.

2.While pushing the tab, insert the tip of the cable.

3.Release the tab.

Connecting Peripheral Equipment

TIPS

•Be sure to connect the + and - terminals and the left and right speakers properly.

•Avoid short circuiting the + and - terminals.

12.Audio1 input terminals

13.Audio2 input terminals

•Set the audio input terminal to be used in each input mode in AUDIO SELECT on the OPTION menu.

14. PC RGB input terminals

•Set BNC of INPUT SELECT on the OPTION menu to PC RGB when using the PC RGB input terminals.

•Select the audio input terminal to be used in PC RGB of AUDIO SELECT on the OPTION menu.

15. AV component input terminals

•Set BNC of INPUT SELECT on the OPTION menu to AV COMPONENT when using the AV component input terminals.

•Select the audio input terminal to be used in AV COMPONENT of AUDIO SELECT on the OPTION menu.

•Cannot be used when D-SUB in INPUT SELECT on the OPTION menu is set to AV COMPONENT.

16. AV video input terminal

•Select the audio input terminal to be used in AV VIDEO of AUDIO SELECT on the OPTION menu.

•Cannot be used when D-SUB in INPUT SELECT on the OPTION menu is set to AV VIDEO.

17. AV S-video input terminal

•Select the audio input terminal to be used in AV S-VIDEO of AUDIO SELECT on the OPTION menu.

13 E

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PN-A601 GREEN-AND-YELLOW For Customers in U.KBlue BrownImportant Information Refer Servicing to Qualified Service PersonnelInformation on Disposal for Business Users Information on Disposal for Users private householdsEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Fan in this product has a limited lifetime Use only the power cord supplied with the monitorDo not place the monitor on a device which generates heat Mounting PrecautionsSupplied Components ContentsNFront view Part NamesNRear view 11 E Connection when the PN-ZB01 optional is attached Connecting Peripheral Equipment13 E Connecting Peripheral EquipmentExample connection Audio1 input terminals Audio2 input terminalsWhen attaching the remote control sensor box to this monitor Installing the batteries Preparing the Remote Control UnitRemote control operation range 15 EBinding Cables Connecting the Power Cord17 E Removing the HandlesTurning on the main power Turning Power On/OffTurning power on/off Disabling power on/off operations19 E Basic OperationMute MenuWide Zoom Normal Basic Operation NSwitching the screen sizeDot by Dot Cut off21 E Menu ItemsDisplaying the menu screen Menu Items Menu item detailsNSCREEN NPICTURE23 E NSETUPMenu Items NAUDIO Standby Mode Power on DelayLAN Setup Option DC OUT SettingNOPTION 25 ENPIP/PbyP Menu Items NMULTINDual screen display 27 EMenu Items NEnlarge PIPPower Menu Items NZOOM2 Special SettingNSCHEDULE DAY of the WeekNAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment 29 EAdjustment Lock ALL ResetAdjustment Lock Target Temperature AlertControlling the Monitor with a PC RS-232C Communication procedure31 E PC connectionWhen a command has not been executed When a command has been executed correctlyWhen RS-232C/LAN Select is set to LAN If execution of the command is taking some timeNID numbers 33 EAdvanced operation NRepeater control Controlling the Monitor with a PC RS-232CVOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←35 E Setting of the Gamma user dataPower control/Input mode selection RS-232C command tableHow to read the command table Command Command field See DirectionControlling the Monitor with a PC RS-232C Screen menu 37 EControlling the Monitor with a PC RS-232C Picture menu 39 E Setup menuControlling the Monitor with a PC RS-232C Audio menu Asap Controlling the Monitor with a PC RS-232C Option menuAssa Input41 E Image Position Epos settingControlling the Monitor with a PC RS-232C Multi menu Landscape orientation Portrait orientationControlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menu43 E Commands for setting of the Gamma user dataControlling the Monitor with a PC RS-232C Others Controlling the Monitor with a PC LAN Settings to connect to a LANTo set on the monitor 45 E Default Gateway 0.0To set from a PC Controlling the Monitor with a PC LANBasic operation Controlling with a PC47 E Standby mode, Power on is the operation availableInformation about this monitor appears DNS Server User Name / PasswordAccept IP Address IP Address 1 to49 E Recipient E-MAIL Addresses Attach the log file to a TEMPERATURE/HARDWARE error e-mailCondition Confirmation51 E Troubleshooting 53 E TroubleshootingNPN-A601 Product Specifications SpecificationsNPN-ZR01 optional Product Specifications NPower management NDimensional Drawings SpecificationsNPOWER Limited See 55 EHdmi Specifications NCompatible signal timing PC57 E Specifications NCompatible signal timing AVNPC D-sub input terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC/AV DVI-D output terminal pins NPC/AV Hdmi input terminal pins59 E PN-A601 Mu EN11J1

PN-A601, PNA601 specifications

The Sharp PNA601, also known as the PN-A601, is a remarkable touchscreen display that has garnered attention in various commercial and professional environments. Designed for versatility and reliability, this model serves as an ideal solution for digital signage, interactive presentations, or as part of a collaborative workspace.

One of the standout features of the Sharp PNA601 is its impressive 60-inch diagonal screen size, which is specifically designed to capture attention while delivering vivid imagery. The display employs advanced LCD technology to ensure sharp picture quality with accurate color reproduction. The Full HD resolution of 1920 x 1080 pixels guarantees that text and images are displayed with stunning clarity, making it suitable for presentations where detail is critical.

In addition to its visual capabilities, the Sharp PNA601 is equipped with a multi-touch functionality that supports multiple touch points. This feature enables several users to interact with the display simultaneously, fostering collaboration during meetings or group presentations. The touch response is smooth and intuitive, making navigation and interaction seamless, whether for professional use or educational purposes.

The device is built with a durable and robust design that allows it to perform consistently in demanding environments. Its anti-glare glass surface minimizes reflections, ensuring that images remain visible in various lighting conditions. This durability extends to the display's long operational life, making it a cost-effective investment for businesses.

Connectivity options on the Sharp PNA601 are abundant, with multiple HDMI, VGA, and USB ports available. This variety ensures that the display can be easily connected to a range of devices, from laptops to media players, enhancing its usability in different settings. Additionally, the display supports various media formats, allowing users to showcase dynamic content with ease.

In terms of installation, the Sharp PNA601 offers flexibility with options for wall mounting or free-standing setups. This adaptability makes it suitable for different environments, whether in retail locations, conference rooms, or educational institutions.

Moreover, the Sharp PNA601 is energy-efficient, adhering to modern standards for sustainable technology. Its low power consumption while maintaining high performance showcases the manufacturer’s commitment to eco-friendly practices.

In conclusion, the Sharp PNA601/PN-A601 is a sophisticated touchscreen display that combines cutting-edge technology with practical features, making it an exceptional choice for a variety of applications. Its stunning visual capabilities, robust design, and user-friendly interface provide an unparalleled experience for anyone looking to enhance their digital presentations or interactive signage.
Top Page Image Contents