Sharp PNA601, PN-A601 operation manual 35 E, Setting of the Gamma user data

Page 35

nRepeater control command

Repeater control is achieved by setting the FOURTH CHARACTER of the parameter to “+”.

Example:

VOLM030 +

← Sets volume of all monitors to 30.

In repeater control, responses are returned by all the connected monitors.

If you want to determine that a value has been returned by a specific set, assign ID numbers to each monitor in advance. When some monitors do not return their responses, the probable cause is that the monitors could not receive the command or command processing is not complete. Do not send a new command.

Example: (When 4 monitors are connected, and assigned ID numbers: 1 through 4)

VOLM030 +

WAIT

OK 001

OK 002

OK 003

OK 004 ← If 4 monitors are connected in a chain, reliable operation can be ensured by sending a new command only after a reply has been returned by 4th (last) monitor.

Repeater control can also be used for reading settings.

Controlling the Monitor with a PC (RS-232C)

Setting of the GAMMA user data

nTo transfer the GAMMA user data

Use the user data transfer commands (UGRW, UGGW and UGBW). For each of the R, G and B colors, divide the total 512 pieces of user data into 16 blocks, and transfer 32 pieces of data with each command.

C1 C2 C3 C4 P1 P2 P3 P4 … S1 S2

Command field Block number (01 to 16) Data field Checksum field

Example: To transfer the data of block 1 (0 to 31 levels)

of red (R) data

UGRW01000000010002 … 0031C0

One piece of data consists

of 4 digits.

Command Block number 32 pieces of data

Checksum

*If data is less than 4 digits, add a “0” (zero) to make it 4 digits.

*The checksum field is the character string (ASCII) data of lower-order one byte which indicates the sum of the block number and 32 pieces of data in hexadecimal (0 to F).

nSaving the GAMMA user data

Use the user data save command (UGSV) to save the transferred user data in the monitor.

If the data is not saved, it will be cleared when:

•The main power switch is off

•STANDBY MODE is LOW POWER and the monitor enters standby mode

Example:

VOLM ? ? ? +

WAIT

10001

20002

30003

30004

Volume settings for all monitors are returned.

nActivating the GAMMA user data

To activate the transferred user data, select USER for GAMMA of the PICTURE menu, or send the corresponding RS-232C command.

nChecking the GAMMA user data

Use the user data read commands (UGRR, UGGR and UGBR) to return 512 pieces of user data for each of the R, G and B colors. Divide the data into 16 blocks and return 32 pieces of data with each command. The value to be returned is not the value stored in the monitor, but the value in the

TIPS

•If repeater control is used during ID designation (IDSL, IDLK), the ID designation is canceled.

temporary memory for display. (These values are the same when the user data save command (UGSV) above has been sent.)

TIPS

•The user data is not initialized by RESET of the PICTURE menu. To initialize the user data, use ALL RESET of the FUNCTION menu.

The GAMMA user data initialize command (UGRS) allows the initialization of the user data only.

35 E

Page 34 Page 36
Image 35
Page 34 Page 36
Contents PN-A601 Brown For Customers in U.KGREEN-AND-YELLOW BlueImportant Information Refer Servicing to Qualified Service PersonnelOther Countries outside the EU Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionDear Sharp Customer Safety Precautions Fan in this product has a limited lifetime Use only the power cord supplied with the monitorDo not place the monitor on a device which generates heat Mounting PrecautionsSupplied Components ContentsNRear view Part NamesNFront view 11 E Connection when the PN-ZB01 optional is attached Connecting Peripheral EquipmentAudio1 input terminals Audio2 input terminals Connecting Peripheral Equipment13 E Example connectionWhen attaching the remote control sensor box to this monitor 15 E Preparing the Remote Control UnitInstalling the batteries Remote control operation rangeBinding Cables Connecting the Power Cord17 E Removing the HandlesDisabling power on/off operations Turning Power On/OffTurning on the main power Turning power on/offMenu Basic Operation19 E MuteCut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotDisplaying the menu screen Menu Items21 E NPICTURE Menu item detailsMenu Items NSCREENMenu Items NAUDIO NSETUP23 E Option DC OUT Setting Power on DelayStandby Mode LAN SetupNOPTION 25 ENPIP/PbyP Menu Items NMULTIPIP 27 ENDual screen display Menu Items NEnlargeDAY of the Week Menu Items NZOOM2 Special SettingPower NSCHEDULE29 E Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustmentTemperature Alert ALL ResetAdjustment Lock Adjustment Lock TargetPC connection Communication procedureControlling the Monitor with a PC RS-232C 31 EIf execution of the command is taking some time When a command has been executed correctlyWhen a command has not been executed When RS-232C/LAN Select is set to LANAdvanced operation 33 ENID numbers OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← Controlling the Monitor with a PC RS-232CNRepeater control VOLM0020 ←35 E Setting of the Gamma user dataCommand Command field See Direction RS-232C command tablePower control/Input mode selection How to read the command tableControlling the Monitor with a PC RS-232C Screen menu 37 EControlling the Monitor with a PC RS-232C Picture menu Controlling the Monitor with a PC RS-232C Audio menu Setup menu39 E Input Controlling the Monitor with a PC RS-232C Option menuAsap AssaLandscape orientation Portrait orientation Image Position Epos setting41 E Controlling the Monitor with a PC RS-232C Multi menuControlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user data43 E To set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN Controlling the Monitor with a PC LAN Default Gateway 0.045 E To set from a PCBasic operation Controlling with a PCInformation about this monitor appears Standby mode, Power on is the operation available47 E IP Address 1 to User Name / PasswordDNS Server Accept IP Address49 E Confirmation Attach the log file to a TEMPERATURE/HARDWARE error e-mailRecipient E-MAIL Addresses Condition51 E Troubleshooting 53 E TroubleshootingNPN-ZR01 optional Product Specifications SpecificationsNPN-A601 Product Specifications 55 E NDimensional Drawings SpecificationsNPower management NPOWER Limited SeeHdmi Specifications NCompatible signal timing PC57 E Specifications NCompatible signal timing AVNPC/AV Hdmi input terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC D-sub input terminal pins NPC/AV DVI-D output terminal pins59 E PN-A601 Mu EN11J1

PN-A601, PNA601 specifications

The Sharp PNA601, also known as the PN-A601, is a remarkable touchscreen display that has garnered attention in various commercial and professional environments. Designed for versatility and reliability, this model serves as an ideal solution for digital signage, interactive presentations, or as part of a collaborative workspace.

One of the standout features of the Sharp PNA601 is its impressive 60-inch diagonal screen size, which is specifically designed to capture attention while delivering vivid imagery. The display employs advanced LCD technology to ensure sharp picture quality with accurate color reproduction. The Full HD resolution of 1920 x 1080 pixels guarantees that text and images are displayed with stunning clarity, making it suitable for presentations where detail is critical.

In addition to its visual capabilities, the Sharp PNA601 is equipped with a multi-touch functionality that supports multiple touch points. This feature enables several users to interact with the display simultaneously, fostering collaboration during meetings or group presentations. The touch response is smooth and intuitive, making navigation and interaction seamless, whether for professional use or educational purposes.

The device is built with a durable and robust design that allows it to perform consistently in demanding environments. Its anti-glare glass surface minimizes reflections, ensuring that images remain visible in various lighting conditions. This durability extends to the display's long operational life, making it a cost-effective investment for businesses.

Connectivity options on the Sharp PNA601 are abundant, with multiple HDMI, VGA, and USB ports available. This variety ensures that the display can be easily connected to a range of devices, from laptops to media players, enhancing its usability in different settings. Additionally, the display supports various media formats, allowing users to showcase dynamic content with ease.

In terms of installation, the Sharp PNA601 offers flexibility with options for wall mounting or free-standing setups. This adaptability makes it suitable for different environments, whether in retail locations, conference rooms, or educational institutions.

Moreover, the Sharp PNA601 is energy-efficient, adhering to modern standards for sustainable technology. Its low power consumption while maintaining high performance showcases the manufacturer’s commitment to eco-friendly practices.

In conclusion, the Sharp PNA601/PN-A601 is a sophisticated touchscreen display that combines cutting-edge technology with practical features, making it an exceptional choice for a variety of applications. Its stunning visual capabilities, robust design, and user-friendly interface provide an unparalleled experience for anyone looking to enhance their digital presentations or interactive signage.
Top Page Image Contents