Sharp PN-A601, PNA601 Menu Items NZOOM2 Special Setting, Nschedule, Power, DAY of the Week, Input

Menu Items

nZOOM2 SPECIAL SETTING

If you connect a laptop computer with any of the following screen resolutions and black bands appear around the screen, set ZOOM2 SPECIAL SETTING of INPUT SIGNAL on the OPTION menu to ON and then select ZOOM2 in the SIZE setting.

This displays the area inside the black band.

Laptop computer	Corresponding signal*1
resolution
1280x800	1280x1024, 1280x960, 1400x1050*2
1280x600	1280x720
1024x600	1024x768

*1: This setting is effective only when the screen resolution, including the black band, is one of the resolutions listed above.

*2: Use the automatic screen adjustment.

nSCHEDULE

You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu. (See page 25.)

When BRIGHT is set, set BRIGHTNESS SENSOR to OFF on the SETUP menu.

SCHEDULE

PC D-SUB

(2)

– –/– –/– – – –

– – –

– –:– –:– –

– –

(5)

(6)

No. (1)

(3)

(4)

POWER

DAY OF THE WEEK

TIME

INPUT

BRIGHT

–

– –

–

– –

-

– –

– –

:

– –

– –

– –

– –

–

– –

–

– –

-

– –

– –

:

– –

– –

– –

– –

–

– –

–

– –

-

– –

– –

:

– –

– –

– –

– –

–

– –

–

– –

-

– –

– –

:

– –

– –

– –

– –

–

– –

–

– –

-

– –

– –

:

– –

– –

– –

– –

–

– –

–

– –

-

– –

– –

:

– –

– –

– –

– –

–

– –

–

– –

-

– –

– –

:

– –

– –

– –

– –

–

– –

–

– –

-

– –

– –

:

– –

– –

– –

– –

1 9 2 0 x 1 0 8 0

V: 60 Hz

H: 67.5 kHz

OK···[MENU]

1.Press or to select the SCHEDULE number, and press .

2.Set the SCHEDULE. (See the description below.)

Press or to select items, and press or to change the setting.

3.Press MENU .

SCHEDULE becomes effective.

(1)

●: SCHEDULE effective

-: SCHEDULE not effective

(2) POWER

ON : Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the monitor in standby mode.

(3) DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE. 0: ONLY ONCE

Executes the SCHEDULE once on the specified day. Specify the day of the week to execute the SCHEDULE.

1: EVERY WEEK

Executes the SCHEDULE on the specified day of the week every week. Specify the day of the week to execute the

SCHEDULE.

Periodic setting such as “Monday through Friday” is also possible.

2: EVERY DAY

Executes the SCHEDULE every day regardless of the day of the week.

(4) TIME

Specifies the time to execute the SCHEDULE. Set the time on a 12-hour basis. (Factory default)

Can be entered as 24-hour time using the TIME setting in

DATE/TIME FORMAT.

(5) INPUT

Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears.

Input modes displayed on DVI, HDMI, BNC and D-SUB depend on INPUT SELECT settings.

(6) BRIGHT

Sets the brightness when changing the screen brightness at a specified time.

Caution

•Do not switch off the main power after setting the

SCHEDULE.

•Specify the correct date and time. (See page 25.) SCHEDULE does not function unless the date and time are specified.

•Check regularly that the set date and time are correct.

•When STANDBY MODE is LOW POWER, SCHEDULE cannot be set.

•When a temperature abnormality occurs and the backlight brightness is reduced, the brightness is not changed even if a schedule set to BRIGHT is executed.

TIPS

•Up to 8 SCHEDULE items can be registered.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap.

•If D-SUB of INPUT SELECT on the OPTION menu is set to AV VIDEO, the input mode will switch to AV VIDEO (D-SUB) regardless if set to D-SUB or VIDEO.

E28