Sharp PNA601, PN-A601 operation manual 23 E, Menu Items NAUDIO, Nsetup

MENU .

USER

Adjusts each item when the WHITE BALANCE is set to

USER.
R-CONTRAST	Adjusts bright-toned red component.
G-CONTRAST....	Adjusts bright-toned green component.
B-CONTRAST	Adjusts bright-toned blue component.
R-OFFSET	Adjusts dark-toned red component.
G-OFFSET	Adjusts dark-toned green component.
B-OFFSET	Adjusts dark-toned blue component.

COPY TO USER

Copies the value set for PRESET to the USER setting. Select “ON” and then press MENU .

GAMMA

Selects the gamma. USER sets the gamma to the sent value (see page 35). (In PIP mode, the main side setting is reflected in the image.)

When using LOCAL DIMMING, it controls the brightness per area. So, the gamma may differ from the set value.

LOCAL DIMMING

Automatically controls the backlight brightness per area according to the image. Increasing the level of this setting will result in higher contrast of the image, and will lower the monitor power consumption.

Light leakage and/or a ring-like appearance may be seen depending on the image. Change the setting in this situation. (In PIP mode, the main side setting is reflected in the image.)

POWER LIMITED

Can be set when LOCAL DIMMING is HIGH. Set the value so that it is smaller than the set power consumption (see page 55.) by adjusting the brightness, etc.

DISPLAY COLOR PATTERN

Displays a color pattern. Can be displayed while the menu screen is displayed, so you can refer to the pattern while adjusting the image.

OFF	No pattern display.
WHITE	White single color pattern display.
RED	Red single color pattern display.
GREEN	Green single color pattern display.
BLUE	Blue single color pattern display.
USER	Red/green/blue mixed color pattern display.
	When USER is selected, set each color’s
	level.

RESET

Resets the values of the PICTURE menu items to the factory preset values.

Select “ON” and then press

Menu Items

nAUDIO

TREBLE

Adjusts the volume of treble-level sound.

BASS

Adjusts the volume of bass-level sound.

BALANCE

Adjusts the balance of the audio sound between right and left.

RESET

Resets the values of the AUDIO menu items to the factory preset values.

Select “ON” and then press MENU .

nSETUP

OSD H-POSITION

Adjusts the horizontal display position of menu screen.

OSD V-POSITION

Adjusts the vertical display position of menu screen.

SCREEN MOTION

Residual images are reduced by moving the screen. PATTERN1 ..... The whole screen moves vertically and

horizontally.

PATTERN2 ..... A black screen spreads from the bottom of

the screen and then shrinks to the bottom of the screen.

If the monitor is installed in the portrait orientation, a black screen spreads from the left end of the screen and then shrinks to the left end of the screen.

PATTERN3 ..... A black bar moves from the left end to the

right end of the screen.

If the monitor is installed in the portrait orientation, a black bar moves from the top to the bottom of the screen.

PATTERN4 ..... Black screens appear from both the top and

bottom of the screen, and the displayed image is compressed into the central field. If the monitor is installed in the portrait orientation, the screen is compressed from the left and right ends.

PATTERN1PATTERN2

PATTERN3PATTERN4

MOTION TIME 1

Specify a time period (operating interval) until SCREEN MOTION starts.

MOTION TIME 2

Specify a time period during which SCREEN MOTION operates (time period during which the screen will move).

MONITOR

Select the installation direction of the monitor.

LANDSCAPE	Horizontal orientation
PORTRAIT	Vertical orientation

23 E