Sharp PN-A601, PNA601 Controlling the Monitor with a PC LAN, Settings to connect to a LAN

Page 44

Controlling the Monitor with a PC (LAN)

When the PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN.

You can also configure the monitor to send e-mail notification when it has a problem.

The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through).

Network (LAN)

LAN terminal

Hub

LAN cable (commercially available, straight)

TIPS

•You must assign an IP address to the monitor by following the procedures in “Settings to connect to a LAN”. (See the description on the right.)

•Your PC must be installed with Internet Explorer (version 7.0 or later).

•To control the monitor via LAN, set RS-232C/LAN SELECT to LAN. (See page 24.)

•You cannot use RS-232C and LAN control simultaneously.

Initializing personal information

•When the PN-ZB01 (optional) is attached, personal information such as e-mail addresses can be registered in the monitor. Before transferring or disposing of the monitor, initialize all settings by selecting ALL RESET 1. (See page 30.) Note that ALL RESET 2 will not initialize e-mail addresses and other settings.

Settings to connect to a LAN

Set the monitor’s IP address and subnet mask to match the settings of your LAN.

These settings can be made on either the monitor or a PC connected to the monitor.

The settings depend on the configuration of your LAN. Ask your LAN administrator for details.

■ To set on the monitor

Set RS-232C/LAN SELECT on the SETUP menu to LAN, and then set the LAN SETUP options. (See page 24.)

After setting each item, select SET and press MENU .

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON.

To set the address manually, set this to OFF.

IP ADDRESS

If the DHCP CLIENT is set to OFF, specify an IP address.

Press or to select items, and press or to change the values.

SUBNET MASK

If the DHCP CLIENT is set to OFF, specify the subnet mask.

Press or to select items, and press or to change the values.

DEFAULT GATEWAY

If the DHCP CLIENT is set to OFF, specify the default gateway.

If you are not using a gateway, specify “0.0.0.0”.

Press or to select items, and press or to change the values.

RESET

Resets the values of the LAN settings to the factory preset values.

Select ON and then press MENU .

TIPS

•When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output terminal and the daisy chain of connected monitors that follows can be assigned automatically. (See page 24.)

E44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents PN-A601 For Customers in U.K GREEN-AND-YELLOWBlue BrownRefer Servicing to Qualified Service Personnel Important InformationInformation on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Use only the power cord supplied with the monitor Fan in this product has a limited lifetimeMounting Precautions Do not place the monitor on a device which generates heatContents Supplied ComponentsNRear view Part NamesNFront view 11 E Connecting Peripheral Equipment Connection when the PN-ZB01 optional is attachedConnecting Peripheral Equipment 13 EExample connection Audio1 input terminals Audio2 input terminalsWhen attaching the remote control sensor box to this monitor Preparing the Remote Control Unit Installing the batteriesRemote control operation range 15 EConnecting the Power Cord Binding CablesRemoving the Handles 17 ETurning Power On/Off Turning on the main powerTurning power on/off Disabling power on/off operationsBasic Operation 19 EMute MenuBasic Operation NSwitching the screen size Wide Zoom NormalDot by Dot Cut offDisplaying the menu screen Menu Items21 E Menu item details Menu ItemsNSCREEN NPICTUREMenu Items NAUDIO NSETUP23 E Power on Delay Standby ModeLAN Setup Option DC OUT Setting25 E NOPTIONMenu Items NMULTI NPIP/PbyP27 E NDual screen displayMenu Items NEnlarge PIPMenu Items NZOOM2 Special Setting PowerNSCHEDULE DAY of the WeekAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 29 EALL Reset Adjustment LockAdjustment Lock Target Temperature AlertCommunication procedure Controlling the Monitor with a PC RS-232C31 E PC connectionWhen a command has been executed correctly When a command has not been executedWhen RS-232C/LAN Select is set to LAN If execution of the command is taking some timeAdvanced operation 33 ENID numbers Controlling the Monitor with a PC RS-232C NRepeater controlVOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←Setting of the Gamma user data 35 ERS-232C command table Power control/Input mode selectionHow to read the command table Command Command field See Direction37 E Controlling the Monitor with a PC RS-232C Screen menuControlling the Monitor with a PC RS-232C Picture menu Controlling the Monitor with a PC RS-232C Audio menu Setup menu39 E Controlling the Monitor with a PC RS-232C Option menu AsapAssa InputImage Position Epos setting 41 EControlling the Monitor with a PC RS-232C Multi menu Landscape orientation Portrait orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menuControlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user data43 E To set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN Default Gateway 0.0 45 ETo set from a PC Controlling the Monitor with a PC LANControlling with a PC Basic operationInformation about this monitor appears Standby mode, Power on is the operation available47 E User Name / Password DNS ServerAccept IP Address IP Address 1 to49 E Attach the log file to a TEMPERATURE/HARDWARE error e-mail Recipient E-MAIL AddressesCondition Confirmation51 E Troubleshooting Troubleshooting 53 ENPN-ZR01 optional Product Specifications SpecificationsNPN-A601 Product Specifications NDimensional Drawings Specifications NPower managementNPOWER Limited See 55 ESpecifications NCompatible signal timing PC HdmiSpecifications NCompatible signal timing AV 57 ESpecifications NPC/AV DVI-D input terminal pins NPC D-sub input terminal pinsNPC/AV DVI-D output terminal pins NPC/AV Hdmi input terminal pins59 E PN-A601 Mu EN11J1

PN-A601, PNA601 specifications

The Sharp PNA601, also known as the PN-A601, is a remarkable touchscreen display that has garnered attention in various commercial and professional environments. Designed for versatility and reliability, this model serves as an ideal solution for digital signage, interactive presentations, or as part of a collaborative workspace.

One of the standout features of the Sharp PNA601 is its impressive 60-inch diagonal screen size, which is specifically designed to capture attention while delivering vivid imagery. The display employs advanced LCD technology to ensure sharp picture quality with accurate color reproduction. The Full HD resolution of 1920 x 1080 pixels guarantees that text and images are displayed with stunning clarity, making it suitable for presentations where detail is critical.

In addition to its visual capabilities, the Sharp PNA601 is equipped with a multi-touch functionality that supports multiple touch points. This feature enables several users to interact with the display simultaneously, fostering collaboration during meetings or group presentations. The touch response is smooth and intuitive, making navigation and interaction seamless, whether for professional use or educational purposes.

The device is built with a durable and robust design that allows it to perform consistently in demanding environments. Its anti-glare glass surface minimizes reflections, ensuring that images remain visible in various lighting conditions. This durability extends to the display's long operational life, making it a cost-effective investment for businesses.

Connectivity options on the Sharp PNA601 are abundant, with multiple HDMI, VGA, and USB ports available. This variety ensures that the display can be easily connected to a range of devices, from laptops to media players, enhancing its usability in different settings. Additionally, the display supports various media formats, allowing users to showcase dynamic content with ease.

In terms of installation, the Sharp PNA601 offers flexibility with options for wall mounting or free-standing setups. This adaptability makes it suitable for different environments, whether in retail locations, conference rooms, or educational institutions.

Moreover, the Sharp PNA601 is energy-efficient, adhering to modern standards for sustainable technology. Its low power consumption while maintaining high performance showcases the manufacturer’s commitment to eco-friendly practices.

In conclusion, the Sharp PNA601/PN-A601 is a sophisticated touchscreen display that combines cutting-edge technology with practical features, making it an exceptional choice for a variety of applications. Its stunning visual capabilities, robust design, and user-friendly interface provide an unparalleled experience for anyone looking to enhance their digital presentations or interactive signage.
Top Page Image Contents