Sharp PNA601 45 E, To set from a PC, Controlling the Monitor with a PC LAN, Default Gateway 0.0

Page 45

■ To set from a PC

When the monitor is connected to a PC, LAN settings can be configured via PC.

Set up process

(1)Connect your monitor to a PC

(2)Specify the PC’s IP address

(3)Configure the monitor’s LAN settings

(1) Connecting your monitor to a PC

Connect a commercially available crossover LAN cable (UPT cable, Category 5) to the LAN port on the PC and this monitor.

LAN terminal

PC

To LAN terminal

LAN cable (commercially available, crossover)

(2) Specifying the PC’s IP address

To configure the monitor’s LAN settings, you must temporarily change the settings on the PC.

This explanation is based on Windows 7.

1.Log on to the PC with an administrator account.

2.Click [Start], and then click “Control Panel”.

3.Click “View network status and tasks” in “Network and

Internet”.

In “Classic View”, click “Network and Sharing Center”.

4.Click “Local Area Connection” and then “Properties”.

5.Click “Internet Protocol Version 4 (TCP/IPv4)” and then

“Properties”.

6.Make a note of the current IP address, subnet mask, and default gateway settings.

Make sure you write this information now as you will be changing the IP address, subnet mask, and default gateway settings back to these settings afterwards.

Controlling the Monitor with a PC (LAN)

7.Temporarily change the IP address and subnet mask.

To access the monitor as it is shipped from the factory, set as follows.

•IP Address: 192.168.150.1

•Subnet Mask: 255.255.255.0

•Default Gateway: (leave blank)

8. Click [OK] and then reboot the PC.

TIPS

•This monitor is factory preset as shown below. (When DHCP CLIENT is set to OFF)

IP Address

: 192.168.150.2

Subnet Mask

: 255.255.255.0

Default Gateway

: 0.0.0.0

(3)Configuring the monitor’s LAN settings

Access the monitor using Internet Explorer.

Controlling the monitor

1.Turn the power ON to the monitor.

2.Set RS-232C/LAN SELECT on the SETUP menu to LAN.

3.Set DHCP CLIENT to OFF in LAN SETUP on the SETUP menu.

PC operation

4.Launch Internet Explorer, in the “Address” box type “http://192.168.150.2/” and press the Enter key.

You will be prompted to enter a user name and password.

5.Leave the user name and password boxes blank and click [OK].

6.Click on “LAN SETUP” under NETWORK.

45 E

Page 44 Page 46
Image 45
Page 44 Page 46
Contents PN-A601 GREEN-AND-YELLOW For Customers in U.KBlue BrownImportant Information Refer Servicing to Qualified Service PersonnelInformation on Disposal for Business Users Information on Disposal for Users private householdsEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Fan in this product has a limited lifetime Use only the power cord supplied with the monitorDo not place the monitor on a device which generates heat Mounting PrecautionsSupplied Components ContentsPart Names NFront viewNRear view 11 E Connection when the PN-ZB01 optional is attached Connecting Peripheral Equipment13 E Connecting Peripheral EquipmentExample connection Audio1 input terminals Audio2 input terminalsWhen attaching the remote control sensor box to this monitor Installing the batteries Preparing the Remote Control UnitRemote control operation range 15 EBinding Cables Connecting the Power Cord17 E Removing the HandlesTurning on the main power Turning Power On/OffTurning power on/off Disabling power on/off operations19 E Basic OperationMute MenuWide Zoom Normal Basic Operation NSwitching the screen sizeDot by Dot Cut offMenu Items 21 EDisplaying the menu screen Menu Items Menu item detailsNSCREEN NPICTURENSETUP 23 EMenu Items NAUDIO Standby Mode Power on DelayLAN Setup Option DC OUT SettingNOPTION 25 ENPIP/PbyP Menu Items NMULTINDual screen display 27 EMenu Items NEnlarge PIPPower Menu Items NZOOM2 Special SettingNSCHEDULE DAY of the WeekNAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment 29 EAdjustment Lock ALL ResetAdjustment Lock Target Temperature AlertControlling the Monitor with a PC RS-232C Communication procedure31 E PC connectionWhen a command has not been executed When a command has been executed correctlyWhen RS-232C/LAN Select is set to LAN If execution of the command is taking some time33 E NID numbersAdvanced operation NRepeater control Controlling the Monitor with a PC RS-232CVOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←35 E Setting of the Gamma user dataPower control/Input mode selection RS-232C command tableHow to read the command table Command Command field See DirectionControlling the Monitor with a PC RS-232C Screen menu 37 EControlling the Monitor with a PC RS-232C Picture menu Setup menu 39 EControlling the Monitor with a PC RS-232C Audio menu Asap Controlling the Monitor with a PC RS-232C Option menuAssa Input41 E Image Position Epos settingControlling the Monitor with a PC RS-232C Multi menu Landscape orientation Portrait orientationControlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menuCommands for setting of the Gamma user data 43 EControlling the Monitor with a PC RS-232C Others Settings to connect to a LAN Controlling the Monitor with a PC LANTo set on the monitor 45 E Default Gateway 0.0To set from a PC Controlling the Monitor with a PC LANBasic operation Controlling with a PCStandby mode, Power on is the operation available 47 EInformation about this monitor appears DNS Server User Name / PasswordAccept IP Address IP Address 1 to49 E Recipient E-MAIL Addresses Attach the log file to a TEMPERATURE/HARDWARE error e-mailCondition Confirmation51 E Troubleshooting 53 E TroubleshootingSpecifications NPN-A601 Product SpecificationsNPN-ZR01 optional Product Specifications NPower management NDimensional Drawings SpecificationsNPOWER Limited See 55 EHdmi Specifications NCompatible signal timing PC57 E Specifications NCompatible signal timing AVNPC D-sub input terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC/AV DVI-D output terminal pins NPC/AV Hdmi input terminal pins59 E PN-A601 Mu EN11J1

PN-A601, PNA601 specifications

The Sharp PNA601, also known as the PN-A601, is a remarkable touchscreen display that has garnered attention in various commercial and professional environments. Designed for versatility and reliability, this model serves as an ideal solution for digital signage, interactive presentations, or as part of a collaborative workspace.

One of the standout features of the Sharp PNA601 is its impressive 60-inch diagonal screen size, which is specifically designed to capture attention while delivering vivid imagery. The display employs advanced LCD technology to ensure sharp picture quality with accurate color reproduction. The Full HD resolution of 1920 x 1080 pixels guarantees that text and images are displayed with stunning clarity, making it suitable for presentations where detail is critical.

In addition to its visual capabilities, the Sharp PNA601 is equipped with a multi-touch functionality that supports multiple touch points. This feature enables several users to interact with the display simultaneously, fostering collaboration during meetings or group presentations. The touch response is smooth and intuitive, making navigation and interaction seamless, whether for professional use or educational purposes.

The device is built with a durable and robust design that allows it to perform consistently in demanding environments. Its anti-glare glass surface minimizes reflections, ensuring that images remain visible in various lighting conditions. This durability extends to the display's long operational life, making it a cost-effective investment for businesses.

Connectivity options on the Sharp PNA601 are abundant, with multiple HDMI, VGA, and USB ports available. This variety ensures that the display can be easily connected to a range of devices, from laptops to media players, enhancing its usability in different settings. Additionally, the display supports various media formats, allowing users to showcase dynamic content with ease.

In terms of installation, the Sharp PNA601 offers flexibility with options for wall mounting or free-standing setups. This adaptability makes it suitable for different environments, whether in retail locations, conference rooms, or educational institutions.

Moreover, the Sharp PNA601 is energy-efficient, adhering to modern standards for sustainable technology. Its low power consumption while maintaining high performance showcases the manufacturer’s commitment to eco-friendly practices.

In conclusion, the Sharp PNA601/PN-A601 is a sophisticated touchscreen display that combines cutting-edge technology with practical features, making it an exceptional choice for a variety of applications. Its stunning visual capabilities, robust design, and user-friendly interface provide an unparalleled experience for anyone looking to enhance their digital presentations or interactive signage.
Top Page Image Contents