Sharp PN-A601, PNA601 operation manual Safety Precautions

Page 6

SAFETY PRECAUTIONS (Continued)

19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

•Use the specified batteries only.

•Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the compartment.

•Do not mix old and new batteries.

•Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.

•Replace an exhausted battery with a new one promptly.

•If you will not use the remote control for a long time, remove the batteries.

•If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your clothing may cause a skin irritation or damage your eye.

20. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system.

21. Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in low-temperature burns.

WARNING:

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: PC/AV DVI-D output terminal, PC/AV DVI-D input terminal, PC/AV HDMI input terminal, PC D-SUB input terminal, PC RGB input terminals, and RS-232C input/output terminals.

If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

•Using fixing devices like wall mount brackets recommended by the manufacturer.

•Only using furniture that can safely support the monitor.

•Ensuring the monitor is not overhanging the edge of the supporting furniture.

•Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the monitor to a suitable support.

•Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.

•Educating children about the dangers of climbing on furniture to reach the monitor or its controls.

Especially for child safety

-Don’t allow children to climb on or play with the monitor.

-Don’t place the monitor on furniture that can easily be used as steps, such as a chest of drawers.

-Remember that children can become excited while watching a program, especially on a “larger than life” monitor. Care should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down.

-Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by curious children.

E6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PN-A601 Blue For Customers in U.KGREEN-AND-YELLOW BrownRefer Servicing to Qualified Service Personnel Important InformationEuropean Union Information on Disposal for Users private householdsInformation on Disposal for Business Users Other Countries outside the EUDear Sharp Customer Safety Precautions Use only the power cord supplied with the monitor Fan in this product has a limited lifetimeMounting Precautions Do not place the monitor on a device which generates heatContents Supplied ComponentsPart Names NFront viewNRear view 11 E Connecting Peripheral Equipment Connection when the PN-ZB01 optional is attachedExample connection Connecting Peripheral Equipment13 E Audio1 input terminals Audio2 input terminalsWhen attaching the remote control sensor box to this monitor Remote control operation range Preparing the Remote Control UnitInstalling the batteries 15 EConnecting the Power Cord Binding CablesRemoving the Handles 17 ETurning power on/off Turning Power On/OffTurning on the main power Disabling power on/off operationsMute Basic Operation19 E MenuDot by Dot Basic Operation NSwitching the screen sizeWide Zoom Normal Cut offMenu Items 21 EDisplaying the menu screen NSCREEN Menu item detailsMenu Items NPICTURENSETUP 23 EMenu Items NAUDIO LAN Setup Power on DelayStandby Mode Option DC OUT Setting25 E NOPTIONMenu Items NMULTI NPIP/PbyPMenu Items NEnlarge 27 ENDual screen display PIPNSCHEDULE Menu Items NZOOM2 Special SettingPower DAY of the WeekNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 29 EAdjustment Lock Target ALL ResetAdjustment Lock Temperature Alert31 E Communication procedureControlling the Monitor with a PC RS-232C PC connectionWhen RS-232C/LAN Select is set to LAN When a command has been executed correctlyWhen a command has not been executed If execution of the command is taking some time33 E NID numbersAdvanced operation VOLM0020 ← Controlling the Monitor with a PC RS-232CNRepeater control OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←Setting of the Gamma user data 35 EHow to read the command table RS-232C command tablePower control/Input mode selection Command Command field See Direction37 E Controlling the Monitor with a PC RS-232C Screen menuControlling the Monitor with a PC RS-232C Picture menu Setup menu 39 EControlling the Monitor with a PC RS-232C Audio menu Assa Controlling the Monitor with a PC RS-232C Option menuAsap InputControlling the Monitor with a PC RS-232C Multi menu Image Position Epos setting41 E Landscape orientation Portrait orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menuCommands for setting of the Gamma user data 43 EControlling the Monitor with a PC RS-232C Others Settings to connect to a LAN Controlling the Monitor with a PC LANTo set on the monitor To set from a PC Default Gateway 0.045 E Controlling the Monitor with a PC LANControlling with a PC Basic operationStandby mode, Power on is the operation available 47 EInformation about this monitor appears Accept IP Address User Name / PasswordDNS Server IP Address 1 to49 E Condition Attach the log file to a TEMPERATURE/HARDWARE error e-mailRecipient E-MAIL Addresses Confirmation51 E Troubleshooting Troubleshooting 53 ESpecifications NPN-A601 Product SpecificationsNPN-ZR01 optional Product Specifications NPOWER Limited See NDimensional Drawings SpecificationsNPower management 55 ESpecifications NCompatible signal timing PC HdmiSpecifications NCompatible signal timing AV 57 ENPC/AV DVI-D output terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC D-sub input terminal pins NPC/AV Hdmi input terminal pins59 E PN-A601 Mu EN11J1

PN-A601, PNA601 specifications

The Sharp PNA601, also known as the PN-A601, is a remarkable touchscreen display that has garnered attention in various commercial and professional environments. Designed for versatility and reliability, this model serves as an ideal solution for digital signage, interactive presentations, or as part of a collaborative workspace.

One of the standout features of the Sharp PNA601 is its impressive 60-inch diagonal screen size, which is specifically designed to capture attention while delivering vivid imagery. The display employs advanced LCD technology to ensure sharp picture quality with accurate color reproduction. The Full HD resolution of 1920 x 1080 pixels guarantees that text and images are displayed with stunning clarity, making it suitable for presentations where detail is critical.

In addition to its visual capabilities, the Sharp PNA601 is equipped with a multi-touch functionality that supports multiple touch points. This feature enables several users to interact with the display simultaneously, fostering collaboration during meetings or group presentations. The touch response is smooth and intuitive, making navigation and interaction seamless, whether for professional use or educational purposes.

The device is built with a durable and robust design that allows it to perform consistently in demanding environments. Its anti-glare glass surface minimizes reflections, ensuring that images remain visible in various lighting conditions. This durability extends to the display's long operational life, making it a cost-effective investment for businesses.

Connectivity options on the Sharp PNA601 are abundant, with multiple HDMI, VGA, and USB ports available. This variety ensures that the display can be easily connected to a range of devices, from laptops to media players, enhancing its usability in different settings. Additionally, the display supports various media formats, allowing users to showcase dynamic content with ease.

In terms of installation, the Sharp PNA601 offers flexibility with options for wall mounting or free-standing setups. This adaptability makes it suitable for different environments, whether in retail locations, conference rooms, or educational institutions.

Moreover, the Sharp PNA601 is energy-efficient, adhering to modern standards for sustainable technology. Its low power consumption while maintaining high performance showcases the manufacturer’s commitment to eco-friendly practices.

In conclusion, the Sharp PNA601/PN-A601 is a sophisticated touchscreen display that combines cutting-edge technology with practical features, making it an exceptional choice for a variety of applications. Its stunning visual capabilities, robust design, and user-friendly interface provide an unparalleled experience for anyone looking to enhance their digital presentations or interactive signage.
Top Page Image Contents