Sharp PN-A601, PNA601 operation manual Controlling with a PC, Basic operation

Page 46

Controlling the Monitor with a PC (LAN)

7. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”.

To set the address manually, set this to “OFF”.

IP ADDRESS

If the DHCP CLIENT is set to “OFF”, specify an IP address.

SUBNET MASK

If the DHCP CLIENT is set to “OFF”, specify the subnet mask.

DEFAULT GATEWAY

If the DHCP CLIENT is set to “OFF”, specify the default gateway.

If you are not using a default gateway, specify “0.0.0.0”.

8.When the setting is changed, click [Apply].

9.Check the message and click [OK].

10.Exit Internet Explorer.

11.Restore the PC’s IP address jotted in Step 6, “(2) Specifying the PC’s IP address”.

12.Connect the monitor and the PC to the LAN.

Caution

•Wait 10 seconds after clicking [OK] before proceeding.

•When operating using the remote control unit or similar, click [Refresh].

TIPS

•When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output terminal and the daisy chain of connected monitors that follows can be assigned automatically. (See page 24.)

Controlling with a PC

■ Basic operation

You use Internet Explorer on a PC on the LAN to control the monitor.

1.Launch Internet Explorer on the PC.

2.In the “Address” box, type “http://” followed by your monitor’s

IP address followed by “/”, then press the Enter key.

You can confirm the IP address with the DISPLAY function.

When prompted to enter a user name and password, type the user name and password that you specified in the security settings (see page 48), and click [OK].

If you did not make any security settings, leave the spaces blank and click on [OK].

3.You can check, control, and change the monitor’s status and settings by clicking the menu items on the left side of the screen.

•If you see an [Apply] button next to a setting, click it after you change that setting.

TIPS

•See pages 47 to 51 for details on each setting.

•If you click [Refresh] before the screen finishes updating the current display, the “Server Busy Error” will appear. Wait for a moment before operating your monitor again.

•You cannot operate the monitor while it is warming up.

•If “DHCP CLIENT” is set to “ON”, press DISPLAY on the remote control unit two times and then check the monitor’s IP address.

E46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents PN-A601 Blue For Customers in U.KGREEN-AND-YELLOW BrownRefer Servicing to Qualified Service Personnel Important InformationEuropean Union Information on Disposal for Users private householdsInformation on Disposal for Business Users Other Countries outside the EUDear Sharp Customer Safety Precautions Use only the power cord supplied with the monitor Fan in this product has a limited lifetimeMounting Precautions Do not place the monitor on a device which generates heatContents Supplied ComponentsNFront view Part NamesNRear view 11 E Connecting Peripheral Equipment Connection when the PN-ZB01 optional is attachedExample connection Connecting Peripheral Equipment13 E Audio1 input terminals Audio2 input terminalsWhen attaching the remote control sensor box to this monitor Remote control operation range Preparing the Remote Control UnitInstalling the batteries 15 EConnecting the Power Cord Binding CablesRemoving the Handles 17 ETurning power on/off Turning Power On/OffTurning on the main power Disabling power on/off operationsMute Basic Operation19 E MenuDot by Dot Basic Operation NSwitching the screen sizeWide Zoom Normal Cut off21 E Menu ItemsDisplaying the menu screen NSCREEN Menu item detailsMenu Items NPICTURE23 E NSETUPMenu Items NAUDIO LAN Setup Power on DelayStandby Mode Option DC OUT Setting25 E NOPTIONMenu Items NMULTI NPIP/PbyPMenu Items NEnlarge 27 ENDual screen display PIPNSCHEDULE Menu Items NZOOM2 Special SettingPower DAY of the WeekNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 29 EAdjustment Lock Target ALL ResetAdjustment Lock Temperature Alert31 E Communication procedureControlling the Monitor with a PC RS-232C PC connectionWhen RS-232C/LAN Select is set to LAN When a command has been executed correctlyWhen a command has not been executed If execution of the command is taking some timeNID numbers 33 EAdvanced operation VOLM0020 ← Controlling the Monitor with a PC RS-232CNRepeater control OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←Setting of the Gamma user data 35 EHow to read the command table RS-232C command tablePower control/Input mode selection Command Command field See Direction37 E Controlling the Monitor with a PC RS-232C Screen menuControlling the Monitor with a PC RS-232C Picture menu 39 E Setup menuControlling the Monitor with a PC RS-232C Audio menu Assa Controlling the Monitor with a PC RS-232C Option menuAsap InputControlling the Monitor with a PC RS-232C Multi menu Image Position Epos setting41 E Landscape orientation Portrait orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menu43 E Commands for setting of the Gamma user dataControlling the Monitor with a PC RS-232C Others Controlling the Monitor with a PC LAN Settings to connect to a LANTo set on the monitor To set from a PC Default Gateway 0.045 E Controlling the Monitor with a PC LANControlling with a PC Basic operation47 E Standby mode, Power on is the operation availableInformation about this monitor appears Accept IP Address User Name / PasswordDNS Server IP Address 1 to49 E Condition Attach the log file to a TEMPERATURE/HARDWARE error e-mailRecipient E-MAIL Addresses Confirmation51 E Troubleshooting Troubleshooting 53 ENPN-A601 Product Specifications SpecificationsNPN-ZR01 optional Product Specifications NPOWER Limited See NDimensional Drawings SpecificationsNPower management 55 ESpecifications NCompatible signal timing PC HdmiSpecifications NCompatible signal timing AV 57 ENPC/AV DVI-D output terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC D-sub input terminal pins NPC/AV Hdmi input terminal pins59 E PN-A601 Mu EN11J1

PN-A601, PNA601 specifications

The Sharp PNA601, also known as the PN-A601, is a remarkable touchscreen display that has garnered attention in various commercial and professional environments. Designed for versatility and reliability, this model serves as an ideal solution for digital signage, interactive presentations, or as part of a collaborative workspace.

One of the standout features of the Sharp PNA601 is its impressive 60-inch diagonal screen size, which is specifically designed to capture attention while delivering vivid imagery. The display employs advanced LCD technology to ensure sharp picture quality with accurate color reproduction. The Full HD resolution of 1920 x 1080 pixels guarantees that text and images are displayed with stunning clarity, making it suitable for presentations where detail is critical.

In addition to its visual capabilities, the Sharp PNA601 is equipped with a multi-touch functionality that supports multiple touch points. This feature enables several users to interact with the display simultaneously, fostering collaboration during meetings or group presentations. The touch response is smooth and intuitive, making navigation and interaction seamless, whether for professional use or educational purposes.

The device is built with a durable and robust design that allows it to perform consistently in demanding environments. Its anti-glare glass surface minimizes reflections, ensuring that images remain visible in various lighting conditions. This durability extends to the display's long operational life, making it a cost-effective investment for businesses.

Connectivity options on the Sharp PNA601 are abundant, with multiple HDMI, VGA, and USB ports available. This variety ensures that the display can be easily connected to a range of devices, from laptops to media players, enhancing its usability in different settings. Additionally, the display supports various media formats, allowing users to showcase dynamic content with ease.

In terms of installation, the Sharp PNA601 offers flexibility with options for wall mounting or free-standing setups. This adaptability makes it suitable for different environments, whether in retail locations, conference rooms, or educational institutions.

Moreover, the Sharp PNA601 is energy-efficient, adhering to modern standards for sustainable technology. Its low power consumption while maintaining high performance showcases the manufacturer’s commitment to eco-friendly practices.

In conclusion, the Sharp PNA601/PN-A601 is a sophisticated touchscreen display that combines cutting-edge technology with practical features, making it an exceptional choice for a variety of applications. Its stunning visual capabilities, robust design, and user-friendly interface provide an unparalleled experience for anyone looking to enhance their digital presentations or interactive signage.
Top Page Image Contents