Visioneer 450 manual Configuring Onetouch, To open the OneTouch Properties window

CONFIGURING ONETOUCH 27

CONFIGURING ONETOUCH

When you installed OneTouch, the software was configured with the applications on your computer that you can scan to. The OneTouch button configuration consists of a Destination Application, a Scan Configuration, and a File Format. The OneTouch Properties window is where you select these three elements.

To open the OneTouch Properties window:

There are two methods that you can use to open the OneTouch Properties.

■Left-click on the OneTouch icon, in the Windows Notification Area, then right-click on the Scan button. Or, left-click on the detailed information.

■Press, hold down for at least 3 seconds, then release the scanner button.

Right-click on the Scan button, Left-click on the detailed information, or press hold- down and release the scanner button.

Note: Some of the options on the OneTouch Properties window (and other scanner windows and dialog boxes) are “grayed out” and are not available. Grayed out options are not appropriate for your Visioneer Strobe XP 450 scanner.