Vidikron SERIES 1080p manual Image Option

Operation

You must enter a passcode in order to enter the Service menu.

Note

Color Select: Use the Color Select menu to select the color space that is appropriate for the source signal, to achieve optimal color balance.

If you select NTSC, HDTV or PAL, you can make further adjustments to individual color space characteristics in the ICC Adjust sub-menu under the ISF Calibration menu, described later in this section. (The Standard color space is factory-set and not adjustable.)

Input Select: To select a source signal, highlight Input Select, press ENTER and select Video, S-Video, Component 1, Component 2, RGB-HD or HDMI. Then, press ENTER to confirm.

Image Option

Image Option

Input Select

Aspect Ratio

SD Enhance

Video Filter

HD/RGB Adjust

Blue Enable

Save Settings

Load Saved Settings

Aspect Ratio: To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from the Main Menu and press ENTER. Select the appropriate aspect ratio for your screen size and the type of program material being viewed; refer to Table 4-1.

When you change the aspect ratio, save the change to a preset

Note afterwards. Otherwise, the change will be lost when a different input is selected. (The aspect ratio is saved for each input and resolution separately.)

Aspect Ratio

Anamorphic (16:9)

Standard (4:3)

Letterbox

IntelliWide

Cinema

Cinema Fill

Vidikron Vision 70 Series Owner’s Operating Manual 49