AMD Sempron™ Processor Model 10 with 256K L2 Cache Data Sheet |
6.4333 FSB AMD Athlon™ System Bus DC Characteristics
Table 4 shows the DC characteristics of the AMD Athlon system bus for this processor.
Table 4. 333 FSB AMD Athlon™ System Bus DC Characteristics
Symbol | Parameter | Condition | Min | Max | Units | Notes |
|
|
|
|
|
|
|
VREF | DC Input Reference Voltage |
| (0.5 x VCC_CORE) | (0.5 x VCC_CORE) | mV | 1 |
| +50 | |||||
|
|
|
|
| ||
|
|
|
|
|
|
|
IVREF_LEAK_P | VREF Tristate Leakage Pullup | VIN = VREF Nominal |
| ∝A |
| |
IVREF_LEAK_N | VREF Tristate Leakage Pulldown | VIN = VREF Nominal |
| 100 | ∝A |
|
VIH | Input High Voltage |
| VREF +200 | VCC_CORE +500 | mV |
|
VIL | Input Low Voltage |
| VREF | mV |
| |
ILEAK_P | Tristate Leakage Pullup | VIN = VSS |
| mA |
| |
(Ground) |
|
| ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
ILEAK_N | Tristate Leakage Pulldown | VIN = VCC_CORE |
| 1 | mA |
|
Nominal |
|
| ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
CIN | Input Pin Capacitance |
| 4 | 7 | pF |
|
RON | Output Resistance |
| 0.90 x RsetN,P | 1.1 x RsetN,P | Ω | 2 |
RsetP | Impedance Set Point, P Channel |
| 40 | 70 | Ω | 2 |
RsetN | Impedance Set Point, N Channel |
| 40 | 70 | Ω | 2 |
Notes:
1. VREF is nominally set to 50% of VCC_CORE with actual values that are specific to motherboard design implementation. VREF must be created with a sufficiently accurate DC source and a sufficiently quiet AC response to adhere to the ± 50 mV specification listed
above.
2. Measured at VCC_CORE / 2.
24 | 333 FSB AMD Sempron™ Processor Model 10 with 256K L2 Cache Specifications | Chapter 6 |