LE10 Radio Receiver | Programming en 15 |
|
|
5.5Program a door address in modes 3 or 4
You can program a door address stored in a MIYS37L Wristband Transmitter with Locating function, in modes 3 or 4.
NOTICE!
A door address must be stored beforehand in a MIYS37L
Wristband Transmitter with Locating function.
NOTICE!
Only one door address of a MIYS37L Wristband Transmitter with Locating function can be matched in the LE10 Radio Receiver.
To start programming
–Press button T1 min. 1 second and max. 3 seconds.
Device behavior
–The green LED stays permanently on.
–The red LED blinks slow for max. 30 seconds.
–Activate the S37L Wristband Transmitter, which you desire to match, before the end of the 30 seconds.
–Upon activating the transmitter, the green LED and the red LED blink alternating quick for 6 seconds.
This indication confirms that the door address in the MIYS37L Wristband Transmitter is matched in the LE10 Radio Receiver.
CAUTION!
When a new door address stored in a MIYS37L Wristband Transmitter is programmed, it overwrites the current door address.
5.5.1Programming in modes 6 or 7
It is neither possible nor necessary to program a transmitter in modes 6 or 7 (Open Receiver).
Bosch Security Systems | User Manual | F.01U.278.517 V2.0 2012.11 |