16 en Operation | LE10 Radio Receiver |
|
|
6Operation
6.1Standby mode
The LE10 Radio Receiver enters standby mode when the power supply is connected. Both relays are off. See Section 4.2.1 Mode indication after power on, page 12.
6.1.1Standby with no transmitter programmed
Device behavior
–The green LED stays permanently on.
–The red LED blinks 3 times every 10 seconds.
6.1.2Standby with at least one transmitter programmed
Device behavior
–The green LED stays permanently on.
–The red LED stays permanently off.
6.2Normal mode (modes 1 and 2)
6.2.1Activation of a transmitter in normal mode
Device behavior
–The green LED stays permanently on. When a matched transmitter is activated:
–The red LED lights up permanently for 10 seconds.
–Relay 1 switches on for 10 seconds.
–Relay 2 stays off.
If the same or another matched transmitter is activated within 10 seconds, the alarm will be retriggered for 10 seconds.
Device behavior when a transmitter has a low battery
–The green LED stays permanently on. When the transmitter is activated:
–The red LED blinks twice for 2 seconds, then lights up permanently for 8 seconds. It then blinks once every 10 seconds.
–Relay 1 switches on for 10 seconds.
F.01U.278.517 V2.0 2012.11 | User Manual | Bosch Security Systems |