LE10 Radio Receiver | Operation en 17 |
|
|
–Relay 2 switches on permanently until the battery is replaced and the transmitter is activated again.
NOTICE!
In normal mode 2, the red LED is deactivated regarding battery- low indication and will not blink every 10 seconds.
Device behavior when the battery is replaced in a transmitter
–The green LED stays permanently on. When the transmitter is activated:
–The red LED stops blinking every 10 seconds, and lights up permanently for 10 seconds.
–Relay 1 switches on for 10 seconds.
–Relay 2 switches off.
6.3Dementia (mode 3)
6.3.1Activation of a MIYS37L Wristband Transmitter
Device behavior
–The green LED stays permanently on. When a MIYS37L transmitter is activated:
–The red LED lights up permanently for 7 seconds.
–Relay 1 switches on for 7 seconds.
–1 second after Relay 1, Relay 2 switches on for 3 seconds. The procedure is repeated if a MIYS37L transmitter is activated again.
Device behavior when a MIYS37L transmitter has a low battery
–The green LED stays permanently on. When the MIYS37L transmitter is activated:
–The red LED blinks twice for 2 seconds and then lights up permanently red for 5 seconds.
–Relay 1 and Relay 2 behave as above.
Bosch Security Systems | User Manual | F.01U.278.517 V2.0 2012.11 |