18 en Operation | LE10 Radio Receiver |
|
|
6.3.2Detection of a MIYS37E Wristband Transmitter alone
Device behavior
–The green LED stays permanently on. When a MIYS37E transmitter is detected:
–The red LED lights up permanently for 30 seconds.
–Relay 1 stays off for 30 seconds.
–Relay 2 switches on for 25 seconds.
During these 30 seconds, all radio reception is fully blocked. This allows a person wearing the MIYS37E to cross the monitored area without generating an accompany signal.
6.3.3Detection of a MIYS37L Wristband Transmitter with a MIYS37E Wristband Transmitter nearby
Device behavior
–The green LED stays permanently on.
When a MIYS37L transmitter and a MIYS37E transmitter are detected by the monitored area:
–The red LED lights up permanently.
–Relay 1 switches on until the MIYS37E transmitter is detected.
–1 second after Relay 1, Relay 2 switches on for 3 seconds. When the MIYS37E transmitter sends its signal (approx. 4 seconds after the MIYS37L):
–The red LED lights up permanently for 30 seconds.
–Relay 1 switches off for 30 seconds.
–Relay 2 stays on for another 25 seconds.
After the detection of the MIYS37E transmitter, all radio reception is fully blocked during 30 seconds. This allows a person wearing the MIYS37E transmitter to accompany a person wearing the MIYS37L transmitter through the monitored area without generating an accompany signal.
F.01U.278.517 V2.0 2012.11 | User Manual | Bosch Security Systems |