SUPER MICRO Computer X9DRD-LF, X9DRD-iF user manual Juidb LAN1/LAN2 Ipmi LAN SP1, LED Indicators

X9DRD-iF/LF Motherboard User’s Manual

JUIDB LAN1/LAN2 (IPMI) LAN SP1

(I-)SATA 0~5, SCU0~3 (I-)SATA 0~1 (X9DRD-LF)

(CPU1) Slot3, Slot4, Slot5,

(CPU2) Slot7 (X9DRD-iF)

(CPU2) Slot6 (X9DRD-iF) PCI-E x16 Slot (X9DRD-LF) (3-)SGPIO 1 (X9DRD-iF)

(T-)SGPIO 1/2 (X9DRD-iF) (BP) USB 0/1, 2/3

(FP) USB 4/5, USB 8/9

(FP USB4/5 only: X9DRD-LF) (FP) USB 6 (X9DRD-iF)

VGA

LED	Description
LED2	Standby PWR LED
LED3	Rear UID LED
LEDM1	BMC Heartbeat LED

UID (Unit Identification) Switch

G-bit Ethernet Ports 1/2

IPMI_Dedicated LAN

Onboard Buzzer (Internal Speaker)

Onboard Serial_Link Connections

(SATA Connections 0~5, SCU Connections 0~3)

PCI-Express 3.0 x8 Slots (See Note Below)

PCI-Express 3.0 x16 Slot (See Note Below)

PCI-Express 3.0 x16 Slot (from P1PE2) (See note on page 1-5)

Serial_Link General Purpose I/O Headers for SCU Connec- tions

Serial ATA (SATA) General Purpose I/O Header Back Panel USB 0/1, 2/3

Front Panel Accessible USB Connections (4/5, 8/9)

Type A USB Embedded Drive Connector

Backpanel VGA Port

LED Indicators
State	Status
Green: On	Standby PWR On
Blue: On	Unit Identified
Green: Blinking	BMC Normal

Warning: To avoid damaging your motherboard and components, please use a power supply that supports a 24-pin, two 4-pin and two 8-pin power connectors. Be sure to connect the 24-pin and the 8-pin power connectors to your power supply for adequate power delivery to your system. The 4-pin power connectors are optional; however, Supermicro recommends that these connectors also be plugged in for optimal power delivery.

1-6