SUPER MICRO Computer X9DRD-iF, X9DRD-LF user manual X9 Motherboard Bios Error Beep Codes

Appendix A: BIOS POST Error Codes

Appendix A

BIOS Error Beep Codes

During the POST (Power-On Self-Test) routines, which are performed at each system boot, errors may occur.

Non-fatal errors are those which, in most cases, allow the system to continue to boot. The error messages normally appear on the screen.

Fatal errors will not allow the system to continue with bootup procedure. If a fatal error occurs, you should consult with your system manufacturer for possible repairs.

These fatal errors are usually communicated through a series of audible beeps. The numbers on the fatal error list correspond to the number of beeps for the corresponding error.

A-1 BIOS Error Beep Codes

X9 Motherboard BIOS Error Beep Codes

Beep Code/LED

1 beep

5 short beeps + 1 long beep

5 beeps

1 beep per device

Error Message

Refresh

Memory error

No Con-In or No Con- Out devices

Refresh

Description

Ready to boot

No memory detected in the system

Con-In includes USB or PS/2 key- board, PCI or Serial Console Redirec- tion, IPMI KVM or SOL.

Con-Out includes Video Controller, PCI or Serial Console Redirection,

IPMI SOL.

1 beep or each USB device detected

1 Continuous Beep

X9 IPMI Error Codes

System OH System Overheat

A-1