You can choose 1, 4, 8, or 12 hours for the power save time.

Set the prompt delay time

The Prompt Delay Time option allows you to control the amount of time that passes before a message prompts you to take further action. For example, if you press Menu in the Copy area and the prompt delay time passes without you pressing another button, the message "Press START COPY to copy. Press Number or OK to select." appears in the color graphics display. You can choose Fast, Normal, Slow, or Off. If you select Off, hints will not appear on the color graphics display but other messages, such as low ink warnings and error messages, will still appear.

1Press Setup.

2Press 7, then press 3.

This displays the Preferences menu and then selects Set Prompt Delay Time.

3Press to select a delay time, then press OK.

Restore the factory defaults

You can restore the original factory settings to what they were when you purchased your HP all-in-one.

Note Restoring the factory defaults will not change the date information you set, nor will it affect any changes you made to scan settings and the language and country/region settings.

You can perform this process from the control panel only.

1Press Setup.

2Press 6, then press 3.

This displays the Tools menu and then selects Restore Factory Defaults. The factory default settings are restored.

Self-maintenance sounds

The HP all-in-one might make noises after long periods (approximately 2 weeks) of inactivity. This is normal operation and is necessary to ensure the HP all-in-one produces the best quality printouts.

one-in-all HP your Maintain

User Guide

165