Load originals and load paper

Chapter 5 (continued)

PaperTips

5Slide the paper into the input tray so that the unattached edge is at the top of the stack.

6Insert the first edge into the input tray until it stops, as shown below.

Avoid paper jams

To help avoid paper jams, follow these guidelines:

Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.

Remove printed papers from the output tray frequently.

Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.

Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input tray must be the same size and type.

Adjust the paper guides in the input tray to fit snugly against all paper. Make sure the paper guides do not bend the paper in the input tray.

Do not force paper too far forward in the input tray.

Use paper types that are recommended for your HP all-in-one. For more information, see Choose papers for printing and copying.

Do not leave originals on the glass. If you load an original in the automatic document feeder while there is already an original on the glass, the original can jam in the automatic document feeder.

For more information about clearing paper jams, see Paper troubleshooting.

38

HP Officejet 7300/7400 series all-in-one