Appendix C: Software Installation
5 Press Enter when both disks for the new array are selected. The Array Properties menu displays (as the screen shown below).
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties to the array.
*Caution: Once the array is created and its properties are assigned, you cannot change the array properties using the ACU. You will need to use the Adaptec Stor- age Manager - Browser Edition. (Refer to Adaptec's User's Guide in the enclosed CD.)
To assign properties to the new array:
1.In the Array Properties menu (as shown in the screen below), select an array type and press Enter.
Note that only the available array types: RAID 0, and RAID1 are displayed on the screen. (*RAID 0 or RAID 1 requires two drives.)