SUPER MICRO Computer 5014C-MF user manual Control Panel LEDs

SUPERSERVER 5014C-MF User's Manual

3-3 Control Panel LEDs

The control panel located on the front of the chassis has fi ve LEDs. These LEDs provide you with critical information related to different parts of the system. This section explains what each LED indicates when illuminated and any corrective ac- tion you may need to take.

Overheat/Fan Fail: When this LED fl ashes, it indicates a fan failure. When on continuously it indicates an overheat condition, which may be caused by cables obstructing the airfl ow in the system or the ambient room temperature being too warm. Check the routing of the cables and make sure all fans are present and operating normally. You should also check to make sure that the chassis covers are installed. Finally, verify that the heatsinks are installed properly (see Chapter 5). This LED will remain fl ashing or on as long as the indicated condition exists.

2

NIC2: Indicates network activity on GLAN2 when fl ashing .

1

NIC1: Indicates network activity on GLAN1 when fl ashing.

HDD: Channel activity for all hard disk drives. This light indicates SATA drive activity when fl ashing.

3-2