SUPER MICRO Computer 5014C-MF user manual Wake-On-Ring, Serial Ports, Power LED

SUPERSERVER 5014C-MF User's Manual

Wake-On-Ring

The Wake-On-Ring header is designated JWOR. This function allows your computer to receive and be "awakened" by an incom- ing call when in the suspend state. See the table on the right for pin defi nitions. You must also have a WOR card and cable to use this feature.

Wake-On-Ring

Pin Definitions

(JWOR)

Pin# Defi nition

1Ground (Black)

2Wake-up

SATA LED

The SATA LED header is designated JSLED. This header is used to display all SATA activity. See the table on the right for pin defi nitions.

Serial Ports

SATA LED Pin

Definitions (JSLED)

Pin# Defi nition

1HD Active

2 HD Active

3HD Active

4HD Active

5 NC

Serial Port Pin Definitions

(COM1/COM2)

Two serial ports are included on the motherboard: COM1 is a port located under the parallel port and COM2 is a header located on the motherboard near the fl oppy connector. See the table on the right for pin defi nitions.

Pin # Defi nition

1DCD

2RXD

3TXD

4DTR

5Ground

Pin # Defi nition

6DSR

7RTS

8CTS

9RI

10 NC

Power LED

The Power LED header is located on JLED. This header provides LED in- dication of power being supplied to the system. See the table on the right for pin defi nitions.

Note: Pin 10 is included on the header but not on the port. NC indicates no connection.

Power LED

Pin Definitions

(JLED)

Pin# Defi nition

1Anode

2Key

3Cathode

5-16