SUPER MICRO Computer 5014C-MF Connector Definitions, Power Supply Connectors, Pwon Connector

SUPERSERVER 5014C-MF User's Manual

5-9 Connector

Definitions

Power Supply Connectors

The primary power supply connector (PW1) on the P8SCT meets the SSI (Superset ATX) 24-pin specifi cation. Refer to the table on the right for the pin defi nitions of the ATX 24-pin power connector. You must also connect the 4-pin (PSW2) processor power con- nector to your power supply. Refer to the table below right for the PW2 (12V) connector.

ATX Power 24-pin Connector

Pin Definitions (PW1)

Pin#	Defi nition	Pin #	Defi nition
13	+3.3V	1	+3.3V
14	-12V		+3.3V
		2
15	COM		COM
		3
16	PS_ON		+5V
		4
17	COM		COM
		5
18	COM		+5V
		6
19	COM		COM
		7
20	Res (NC)		PWR_OK
		8
21	+5V		5VSB
		9
22	+5V	10	+12V
23	+5V	11	+12V
24	COM	12	+3.3V

Important: you must connect PW2 to your power supply to meet the ATX safety requirements.

Required Connection

PW_ON Connector

The PW_ON connector is on pins 1 and 2 of JF1. This header should be connected to the chassis power button. See the table on the right for pin defi nitions.

+12V 4-pin Power

Pin Definitions (PW2)

Pins	Defi nition
1 & 2	Ground
3 & 4	+12V

Power Button

Pin Definitions (JF1)

Pin# Defi nition

1PW_ON

2 Ground

Reset Connector

The reset connector is located on pins 3 and 4 of JF1 and attaches to the reset switch on the computer chas- sis. See the table on the right for pin defi nitions.

Reset Button

Pin Definitions (JF1)

Pin# Defi nition

3Reset

4 Ground

5-12