Appendix C: Software Installation
Using the LSI ICH6R SATA RAID Utility Driver
Accessing the LSI SATA RAID Utility
After the system exits from the BIOS Setup Utility, it will automatically reboot. To run the LSI Logic Embedded SATA RAID Setup Utility, press the <CTRL> and the <M> keys simultaneously during system bootup as shown in the screen below:
Once you've entered the LSI SATA RAID Setup Utility, the main menu displays as shown below:
Note: Please refer to the LSI User's Guide (included in the CD) to install the LSI SATA RAID Controller driver.