SUPER MICRO Computer 5014C-MF user manual USB Wake-Up, Keyboard Wake-Up, System Power Force On

SUPERSERVER 5014C-MF User's Manual

USB Wake-Up

Use JPUSB1/2 to enable or disable USB Wake-Up, which allows you to wakeup the system by depressing a key on the keyboard or by clicking the mouse when either is connected to a USB port. Enable the jumper to allow the system to be woken up from an S1 or S3 state in Windows OS. The JPUSB1 jumper controls the USB1/2 ports and the JPUSB2 jumper controls the USB2/3 and USB4/5 headers. See the table on the right for jumper settings.

USB Wake-Up

Jumper Settings

(JPUSB1/2)

Jumper Setting	Defi nition
Pins 1-2	Enabled
Pins 2-3	Disabled

Keyboard Wake-Up

The JPWAKE1 jumper is used to al- low the system to be woken up by depressing a key on the keyboard from an S1 or S3 state in Windows OS. See the table on the right for jumper settings. Your power supply must meet ATX specifi cation 2.01 or higher and supply 720 mA of standby power to use this feature.

Keyboard Wake-Up

Jumper Settings

(JPWAKE1)

Jumper Setting	Defi nition
Pins 1-2	Disabled
Pins 2-3	Enabled

System Power Force On

Jumper JPF allows you to enable or disable the Force-Power-On function. If enabled, system power will always stay on. If disabled (the normal set- ting), the user needs to press the power button to power on the system.

System Power Force On

Jumper Settings

(JPF)

Jumper Setting	Defi nition
Closed	Force On
Open	Disabled

5-18