8Hawk 2XL Family Installation Guide, Rev. C
_______________________________________________________________________________________________________________________
Safety instructions
1.The disc drive is to be installed in a customer supplied enclosure where the surrounding air does not exceed 50oC.
2.Four (4)
0.20in. (3/16 inch) (5.08 mm). Screw tightening torque is
6.0
3.The power requirements are shown in the Product Informa- tion section.
4.The power supply must satisfy the safety requirements for SELV (Safety Extra Low Voltage) circuits.
5.Service is to be provided by trained Seagate service personnel.
6.The incorporation of the disc drives listed in this guide into a customer enclosure must meet the appropriate safety requirements of the country in which it is used (e.g. UL 1950,
Note
Power must be off when connecting or disconnecting.