4Hawk 2XL Family Installation Guide, Rev. C
_______________________________________________________________________________________________________________________
•A SCSI* host adapter card for the PC
You may need this if your computer does not already have a hard drive, if your present drive does not connect to a SCSI host adapter, or if your present SCSI adapter card cannot address a drive having the capacity the Hawk 2XL has.
The host adapter card should have instructions with it for installing the card and assist in the installation of hard disc drives that it supports.
•A 50-pin SCSI interface cable
You will need an interface cable if your computer does not presently contain a SCSI hard drive. If you are adding a sec- ond hard drive you must use an interface cable that has two drive connectors, one on the end and one in the middle. See Figure 1.
•A Y-shaped drive power cable
You may need this if your computer does not have enough power cables to supply power to your new hard drive. See Figure 2.
•Mounting screws
You will need four
•Drive mounting rails
You may need drive rails if your computer's drive bay is not designed for direct mounting.
*These drive models use the industry standard SCSI interface.