Seagate ST31055N/W/WC, ST31051N/W/WC, ST32151N/W/WC manual Mounting the drive, Important Precautions

Page 24

22Hawk 2XL Family Installation Guide, Rev. C

_______________________________________________________________________________________________________________________

Mounting the drive

Important Precautions:

Make sure your computer is turned off before beginning in- stallation.

Although switched off, your computer must remain plugged into an electrical outlet with an earth ground. This minimizes the possibility of damage from static discharge.

Static electrical charges can accumulate quickly on people, clothing and synthetic materials. The electrostatic fields due to these charges when brought in close proximity to suscep- tible circuit assemblies and components, can result in de- graded reliability or immediate failure of the affected compo- nent or assembly.

Always wear a grounded wrist strap. Attach the wrist strap to the metal chassis of your computer. Use the antistatic pad as your work surface, and avoid installation in areas with static- inducing carpets.

1.Begin by removing the cover of the computer. Follow the instructions in your computer manual. Systems that use "WC" drives probably do not require cover removal, as the drives are mounted in a module that slides into place and plugs in.

Image 24
Contents Installation Guide Contents Preface Electromagnetic interference EMI considerationsPage Things you may need to install the drive Bootable DOS system diskette for the PC#2 Phillips screwdriver Torx Size TX-08 driver toolShaped drive power cable SCSI* host adapter card for the PCPin Scsi interface cable Mounting screwsExtra configuration jumpers Frame kitBefore you begin Page Safety instructions Sicherheitsanleitung VorsichtDrive configuration Set Drive ID Appl 3a 3d 3b,3c1 3bPage Select Operating Features Line terminators Page Drives WC drive Model W drive ID select and LED connection Models N and W drive configurator, option select WC drives Important Precautions Mounting the driveHawk 2XL Family Installation Guide, Rev. C Using drive rails Direct mountingUsing a conversion frame kit Using a special moduleDrive activity LED Pin drive Multiple drive Drive Drive model WC with single 80 pin connector Power connection to drive Mounting configuration dimensions Configuring the computer for your drive DOS InstallationPage 34Hawk 2XL Family Installation Guide, Rev. C Formatting SeagateTechnology assumes no liability for lost user data Macintosh installation Unix installationTroubleshooting General installation troubleshootingHawk 2XL Family Installation Guide, Rev. C Product repair information Product repair and return information Technical support services To access SeaBoardModem Maximum Location Number Baud rate FAX 408/438-8137Phone 408/438-8222 TDD 408/438-5382Hawk 2XL Family product information Preliminary values