Seagate ST31051N/W/WC, ST31055N/W/WC, ST32151N/W/WC, ST32155N/W/WC manual Multiple drive

Page 29

Hawk 2XL Family Installation Guide, Rev. C

27

_______________________________________________________________________________________________________________________

Multiple drive

“N” Model

Drive

SCSI ID 6

(or last drive)

SCSI ID 1

SCSI ID 0

2 through 6 SCSI devices

Pin 1

(check your

adapter for Pin 1 location)

SCSI ID 7

Host

Adapter

PCB

Figure 4c. Multiple drive connection to host adapter

Image 29
Contents Installation Guide Contents Electromagnetic interference EMI considerations PrefacePage Bootable DOS system diskette for the PC Things you may need to install the drive#2 Phillips screwdriver Torx Size TX-08 driver toolSCSI* host adapter card for the PC Shaped drive power cablePin Scsi interface cable Mounting screwsFrame kit Extra configuration jumpersBefore you begin Page Safety instructions Vorsicht SicherheitsanleitungDrive configuration Set Drive ID 3a 3d 3b,3c1 3b ApplPage Select Operating Features Line terminators Page Drives WC drive Model W drive ID select and LED connection Models N and W drive configurator, option select WC drives Mounting the drive Important PrecautionsHawk 2XL Family Installation Guide, Rev. C Direct mounting Using drive railsDrive activity LED Using a conversion frame kitUsing a special module Pin drive Multiple drive Drive Drive model WC with single 80 pin connector Power connection to drive Mounting configuration dimensions DOS Installation Configuring the computer for your drivePage 34Hawk 2XL Family Installation Guide, Rev. C Formatting SeagateTechnology assumes no liability for lost user data Unix installation Macintosh installationGeneral installation troubleshooting TroubleshootingHawk 2XL Family Installation Guide, Rev. C Product repair information Product repair and return information To access SeaBoard Technical support servicesFAX 408/438-8137 Modem Maximum Location Number Baud rateTDD 408/438-5382 Phone 408/438-8222Hawk 2XL Family product information Preliminary values