Seagate ST31051N/W/WC, ST31055N/W/WC, ST32151N/W/WC manual Mounting configuration dimensions

Hawk 2XL Family Installation Guide, Rev. C 31

_______________________________________________________________________________________________________________________

C [3]

[1]

G

D

F

A

[4]

L

E

[2]

H

K

N

[4]

B

J

M

Notes:

[1]Mounting holes three on each side,

6-32 UNC. Max screw length into side of drive 0.15 in. (3.81 mm). Screw tightening torque 6.0 in-lb (.675 NM) max with minimum thread engagement of 0.12 in. (3.05 mm).

[2]Mounting holes four on bottom, 6-32 UNC. Max screw length into bottom of drive 0.20 in. (5.08 mm). Screw tightening torque 6.0 in-lb (.675 NM) max with minimum thread engagement of 0.12 in. (3.05 mm).

[3]Power and interface connectors can extend past the "A" dimension by 0.040 in. (1.02 mm).

[4]Decorative front panel (optional).

[5]Mounting hole locations same for all Hawk 2XL models.

		Inches		Millimeters
	A	5.74	± .010	145.80	± .25
	B	4.00	± .010	101.60	± .25
	C	1.00	+ .021	25.40	+ .53
			– .009		– .22
	D	2.362	± .010	60.00	± .25
	E	.620	± .020	15.75	± .50
	F	4.000	± .010	101.60	± .25
	G	.250	+ .010	6.35	+ .25
			– .005		– .12
P	H	1.750	± .010	44.45	± .25
	J	3.750	± .010	95.25	± .25
	K	2.370	± .020	60.20	± .50
	L	1.00	± .010	25.4	± .25
	M	4.000	± .010	101.6	± .25
	N	0.19	± .010	4.83	± .25
	P	0.015	max	0.381max

Figure 6. Mounting configuration dimensions