System Administration
displog {on off}
For example, to enable the display of log messages in current telnet session window, type:
sms2000% displog on
For example, to disable the display of log messages in current telnet session window, type:
sms2000% displog off
System Administration Tools
Displaying Version Information
To display the release number, reboot count, system images, active system images, and port information, use the following command:
version
For example, to see version information, type:
sms2000% version
Exiting the Management Session
Use the exit command to exit a management session. If you are using telnet, SMS2000 terminates the connection. If you have made configuration changes during the session, SMS2000 prompts you to save the unsaved changes, if you do not save them, the changes are lost. To exit the management session, use this command
exit
For example, to exit the management session, type:
sms2000% exit
Rebooting the System
In order for saved configuration changes to take effect, you must use the reboot command to restart the system.
To force the system to shut down completely and then restart, use this command:
reboot
TUT Systems, Inc | Page 36 of 104 | P/N |