Perle Systems 5500208-43 manual Server Commands, Set Custom-App, Set Server

2 Server Commands

Chapter 2

This chapter defines all the CLI commands associated with configuring the IOLAN’s server parameters.

Server Commands

Set Custom-App

Description	You can create a custom application that can run on the IOLAN using the Perle SDK.
User Level	Admin
Syntax	set custom-app server program-command-line <command>
Options	program-command-line
	The name of the SDK program executable that has been already been downloaded to
	the IOLAN, plus any parameters you want to pass to the program. Maximum of 80
	characters. Use the shell CLI command as described in the SDK Programmer’s Guide
	to manage the files that you have downloaded to the IOLAN. For example, using
	sample outraw program, you would type:
	outraw -s 0 192.168.2.1:10001 Acct:10001
	if you were starting the application on the Server (notice the -s 0 parameter specifies
	Line 1).

Set Server

Description	Sets server parameters.
User Level	Admin
Syntax	set server [auto-obtain-gw onoff] [banner onoff] [break onoff]
	[bypass-password onoff] [domain <string>]
	[flush-on-close onoff] [internet <IPV4_address>]
	[internet dhcp/bootp onoff] [internet mtu <integer>]
	[monitor-connection-every <seconds>][monitor-connection-timeout
	<seconds>][monitor-connection-number <integer>][name <string>]
	[netmask <IPV4_address>][oem-login onoff]
	[password-limit <0-10>] [prompt-with-name onoff]
	[single-telnet onoff][data-logging-buffer-size
	<integer>][pre-v4.3g-data-logging onoff]
	set server tftp [retry <integer>] [timeout <integer>]
Options	auto-obtain-gw
	When DHCP/BOOTP is enabled, you can enable this option to have the IOLAN receive
	the Default Gateway IP address from the DHCP/BOOTP server.

IOLAN DS1/TS2 CLI Reference Guide, Version 4.3 16