Perle Systems 5500208-43 manual Set IOChannel Multihost, Show IOChannel Status, Kill IOChannel

Set IOChannel

Set IOChannel Multihost

Description	Configures up to 49 hosts/IOLANs that the Digital input channel or input serial signal
	pins (DSR, DCD, or CTS-when the line is configured for signal-io) will connect to. To
	see a list of configured hosts/IOLANs, enter the show iochannel <channel>
User Level	command.
	Admin
Syntax	set iochannel <channel> multihost entry <number> delete
	set iochannel <channel> multihost entry <number> host <host_name>
	<tcp_port>
Options	<channel>
	Specify the Digital input channel or input serial signal pin that will be connecting to all
	the hosts/IOLANs in the multihost list.
	entry
	Specify the multihost table entry number. Valid values are 1-100.
	delete
	Deletes the entry number in the multihost table.
	host
	Specify the preconfigured host that will be in the multihost list.
	Default: None
	<tcp_port>
	Specify the TCP port that the I/O channel or serial signal pin will use to communicate
	to the Host.
	Default: 0

Show IOChannel Status

Description	Shows the I/O channel status for all channels and the serial signal pins (when the line is
User Level	configured for signal-io).
	Admin
Syntax	show iochannel status

Kill IOChannel

Description	Kills the I/O channel.
User Level	Admin
Syntax	kill iochannel <i/o_channel>
	kill iochannel line <number> rtsctsdtrdsrdcd
Options	i/o_channel
	Specify the channel number, for example, d2 or a4. Temperature models use Analog
	input, so the channel numbers are a1-a4.
	rtsctsdtrdsrdcd
	Specify the Digital output pins (RTS or DTR) or Digital input pins (CTS, DSR, or
	DCD).

87 IOLAN DS1/TS2 CLI Reference Guide, Version 4.3