Perle Systems 5500208-43 manual Line Service Commands, Show Line, Options Program-command-line

Line Service Commands

Set Termtype

Description Sets the terminal type for the current terminal session. term1, term2, and term3 refer to the user-uploadable custom terminal definitions. If these are not present, the default is wyse60.

User Level Restricted, Normal, Admin

Syntax set termtype [wyse60vt100ansidumbtvi925ibm3151tevt320hp700term1term2 term3]

Option wyse60vt100ansidumbtvi925ibm3151tevt320hp700term1term2term3

Specifies the type of terminal connected to the line:

zDumb

zWYSE60

zVT100

zANSI

zTVI925

zIBM3151TE

zVT320 (specifically supporting VT320-7)

zHP700 (specifically supporting HP700/44)

zTerm1, Term2, Term3 (user defined terminals)

Show Line

Description	Shows the line settings/information.
User Level	Admin
Syntax	show line

Line Service Commands

Set Custom-App

Description	You can create a custom application that can run on a specific serial line in IOLAN
User Level	using the Perle SDK.
	Admin
Syntax	set custom-app line .<number>* program-command-line <command>
Options	program-command-line
	The name of the SDK program executable that has been already been downloaded to
	the IOLAN, plus any parameters you want to pass to the program. Maximum of 80
	characters. Use the shell CLI command as described in the SDK Programmer’s Guide
	to manage the files that you have downloaded to the IOLAN. For example, using
	sample outraw program, you would type:
	outraw 192.168.2.1:10001 Acct:10001
	if you were starting the application on a line.

46