Perle Systems 5500208-43 manual Delete Community, Delete Trap, Set Snmp

SNMP Commands

	<config_host><ip_address>
	Defines the hosts (by IPv4 or IPv6 address) that will receive trap messages generated by
	the IOLAN. Up to four trap hosts can be defined.
	<version>
	Select the version of trap you want the IOLAN to send. Valid options are v1, v2c or v3.
	<type>
	Select between trap or inform. Inform requires the receiving host to acknowledge
	receipt of the trap.
Delete Community
Description	Deletes an SNMP community (version 1 and version 2).
User Level	Admin
Syntax	delete community <config_community_number>
Option	<config_community_number>
	When you add an SNMP community, it gets assigned to a number. To delete the SNMP
	community, you need to specify the number of the community that you want to delete.
	To see which community is assigned to what number, type the show snmp command.
Delete Trap
Description	Deletes an SNMP trap host.
User Level	Admin
Syntax	delete trap <config_trap_number>
Option	<config_trap_number>
	When you add an SNMP trap host, it gets assigned to a number. To delete the SNMP
	trap host, you need to specify the number of the trap that you want to delete. To see
	which trap host is assigned to what number, type the show snmp command.
Set SNMP
Description	Configures SNMP settings.
User Level	Admin
Syntax	set snmp [contact <string>] [location <string>]
	[readonly user <username>] [readwrite user <username>][trap user
	<username>]
Options	contact
	The name and contract information of the person who manages this SMNP node.
	location
	The physical location of the SNMP node.
	readonly user
	Specifies the name of the read only user.
	readwrite user
	Specifies the name of the read/write user.
	trap user
	Specify the name of the trap user.

59