Event Logs
DHCP services – release. <IP address> released.
Generated when IP address displayed is released from its assignment to a device and put back in the IP pool for re- assignment.
Error executing: XXXXXX
Generated when an error is detected loading back a configuration. The invalid command is specified.
Incorrect password from <IP address>
Generated when an incorrect password is given for a Telnet connection. The connecting bridge/router’s name or IP address is specified. After three incorrect login attempts within ten minutes, an alarm is generated (see Security alarms: “Possible intruder”) and any further attempts from that IP address within the next ten minutes are rejected.
Invalid Relay Destination for subnetted network
Generated when a device attempts to do a network broadcast on a subnetted network.
IP must be enabled on remote site <remote site id>
Generated when the Internet Protocol Control Protocol negotiations failed due to the remote site device having the IPCP function disabled.
IPX: Network configuration error from X, network Y.
Generated when the router and server do not agree on a network number.
IPX: routing table full
Generated when the IPX RIP table has been filled. Any new RIP frames received will be discarded.
IPX: Service table full
Generated when the IPX SAP table has been filled. Any new SAP frames received will be discarded.
IPX: X, unknown RIP packet type received
Generated when the device receives an invalid RIP packet.
IPX: X, unknown SAP packet type received
Generated when the device receives an invalid SAP packet.
IPX: X, demand RIP failed
Generated when this device reaches the end of the attempts to negotiate demand RIP for the IPXCP connection. After demand RIP has failed, the normal RIP and SAP updates will occur.
LCP X authenticating peer with CHAP
Generated when this device is using CHAP to authenticate the peer (remote) device.
LCP X authenticating peer with PAP
Generated when this device is using PAP to authenticate the peer (remote) device.