Perle Systems IOLINK-520 manual Event Logs

Page 47

Event Logs

LCP X establishing

Generated when the Link Control Protocol of a PPP link or remote site is establishing between this device and the remote site PPP device.

LCP X no reply to Y Echo-Requests

Generated just prior to a link going down. The link or remote site has gone down due to no replies to the echo request messages sent.

LCP X operational

Generated when the Link Control Protocol of a PPP link or remote site has been negotiated and is now operational between this device and the remote site PPP device.

LCP X peer authenticating with CHAP

Generated when the peer (remote) device is using CHAP to authenticate this device.

LCP X peer authenticating with PAP

Generated when the peer (remote) device is using PAP to authenticate this device.

LCP X received Protocol-Reject for <protocol>

Generated when the peer (remote) device rejects one of the Network Control Protocols.

Link X - CSU/DSU Digital Loopback Results [Total: X] [Good: X] [Errors: X] Generated after the CSU/DSU link module has completed a digital loopback test.

Link X - CSU/DSU Remote Loopback Results [Total: X] [Good: X] [Errors: X] Generated after the CSU/DSU link module has completed a remote loopback test.

Link X - CSU/DSU Self Test Results [Total: X] [Good: X] [Errors: X]

Generated after the CSU/DSU link module has completed a self test.

Link X CSU/DSU: Connected

Generated when the CSU/DSU link module has established a connection to the remote partner CSU/DSU.

Link X CSU/DSU: Initialized

Generated when the CSU/DSU link module has completed initialization and has established communications with the IOLINK router.

Link X CSU/DSU: Line ERROR

Generated when the CSU/DSU link module is in an unknown error state.

Link X CSU/DSU: Loopback Ended

Generated after the CSU/DSU link module completes a loopback test.

A.4 — IOLINK-PRO & 520 Reference Manual

Image 47

Contents Reference Manual IP Routing and the IOLINK-PRO & 520 Routers IOLINK-PRO & 520 RoutersComplete IP Connection ARP-Address Resolution ProtocolProxy ARP IOLINK-PRO & 520 Reference Manua Header Checksum IP Header DetailsProtocol Time to liveRedirect Icmp MessagesOptions UnreachableTime and Mask server PingRoute Tables Update MechanismRIP-Routing Information Protocol IPX Address Format IPX Routing and The IOLINK-PRO & 520 RoutersIPX Addressing Network Layer Addressing vs. MAC AddressingIPX Header Other IPX Header InformationSAP Broadcasts Service Advertisement ProtocolEstablishing an IPX Connection RIP/X Operation Server TypesRouting Information Protocol SAP RequestsRIP/X Metrics Bridging and the IOLINK-PRO & 520 RoutersRIP/X Requests Station Address Learning Initial Bridging ProcessAddress Purging Aging TimerAging Exception Filled Address TableLink Compression Iolink Router Feature DefinitionsTelnet Introduction Multipoint WAN TopologiesBandwidth On Demand Point-to-PointTime of Day Connect Application Isdn Single Active Link & Dual Active Link Disaster Recovery Backup LinkOperating Software Upgrades Call Establishment Methods Iolink PRO & 520 Isdn Connection ManagementWide Area Network Topologies Supported Auto-Call Time-of-Day Connections Isdn Connection ManagementManual Call Address ConnectCombination Connection ProcessInteresting Traffic Idle TimerProtocol Awareness Suspension ProcessTermination Process Session Keepalive MessagesRIP-Routing Information Protocol IP SpecificsIP Address Connect Suspension of TCP/IP SessionsIPX Serialization Frames IPX SpecificsRIP/IPX and SAP/IPX Suspension of IPX SessionsLink Clocking Information Pinout InformationModule Identification Link Interfaces Reference ATL CSU/DSU Link Module InformationConsole Pinouts T1/E1 Module CSU/DSU ModuleRS232 Link Pinouts 24 & RS232C Link PinoutsDB15 Female DTE Direction Contact Circuits From Number 11 & X.21 Link PinoutsDB25 Female DTE Direction Contact Circuit From Number Name RS442 & RS530 Link PinoutsNumber Name Link PinoutsDB25 11 RS232 Null-Modem Cable RS232 Null-Modem Cable Configuration12 V.35 Null-Modem Cable Null-Modem Cable Configuration13 RS530 Null-Modem Cable RS530 Null-Modem Cable Configuration14 RS530 to RS449 Conversion Cable RS530 To RS449 Conversion Cable15 V.11/X.21 Null-Modem Cable 11/X.21 Null-Modem Cable ConfigurationWAN Link Control-Signal Operation Event logs Appendix a Event LogsEvent Logs IOLINK-PRO & 520 Reference Manual A.3 Event Logs IOLINK-PRO & 520 Reference Manual A.5 Event Logs IOLINK-PRO & 520 Reference Manual A.7 Event Logs Alarm Logs Event Logs IOLINK-PRO & 520 Reference Manual A.11 Event Logs IOLINK-PRO & 520 Reference Manual A.13 Event Logs IOLINK-PRO & 520 Reference Manual A.15 Event Logs IOLINK-PRO & 520 Reference Manual A.17 Event Logs IOLINK-PRO & 520 Reference Manual A.19 PPP Security Logs Security MAC Address FilteringSecurity-Filter if Destination Programmable FilteringSecurity-Filter if Source Security-Forward if Destination Security-Forward if Source Programmable Filtering Protocol Discrimination Pattern Filter OperatorsBridge Pattern Filtering IP, and no more Protocol Type FieldInternet Protocol IP Filter all IP PacketsFilter all except TCP/IP Transport Control Protocol / Internet Protocol TCP/IPFilter only TCP/IP Filter all IP without TCP trafficEthernet Multicasting Bandwidth ConservationFilter all DEC Ethernet BroadcastingEthernet Station Addresses General RestrictionsInternet Addresses Mask would be 6-010203040506&12-0800&23-06 Example Mask CombinationsIPX Router Pattern Filtering IP Router Pattern FilteringPage Appendix C Frame Formats Octet Locations on an IP Routed TCP/IP Frame IOLINK-PRO & 520 Reference Manual C.3