Perle Systems IOLINK-520 manual IOLINK-PRO & 520 Reference Manual A.11

Page 54

Event Logs

* Download aborted – Incomplete file

Generated when a TFTP download is abortet before the file transfer is complete

* Download aborted – Invalid FCS

Generated when there is a checksum failure after a file download.

* Download aborted – Incompatible boot code

Generated when the operating code file downloaded is incopatible with the boot code in this device. The updated boot code software must be loaded before the operating code can be updated.

* Download aborted – Incompatible software

Generated when the software downloaded is incompatible with this device

* Download configuration too large

The configuration file that is being downloaded will not fit in the memory of this router

* E-mail server added to firewall

The IP address of the E-mail server added to the table of services available through the firewall.

* E-mail server removed from firewall

The IP address of the E-mail server removed from the table of services available through the firewall.

* Erasing config. block: starting

Generated as a notification that the configuration of this device is being erased from non-volatile memory prior to loading a software update.

* Error loading configuration

Generated during a warm start when an error is detected while restoring a configuration from non-volatile RAM.

* Feature upgrade failure, try again

Generated when the device detects a checksum error for the feature upgrade block.

* File copy failed: file crc: X, verify crc: X

Generated when performing a code upgrade and the calculated CRC was found to be different from the transferred CRC (flash.fcs) value.

IOLINK-PRO & 520 Reference Manual — A.11

Image 54

Contents Reference Manual IOLINK-PRO & 520 Routers IP Routing and the IOLINK-PRO & 520 RoutersARP-Address Resolution Protocol Proxy ARPComplete IP Connection IOLINK-PRO & 520 Reference Manua Time to live IP Header DetailsProtocol Header ChecksumUnreachable Icmp MessagesOptions RedirectPing Time and Mask serverUpdate Mechanism RIP-Routing Information ProtocolRoute Tables Network Layer Addressing vs. MAC Addressing IPX Routing and The IOLINK-PRO & 520 RoutersIPX Addressing IPX Address FormatOther IPX Header Information IPX HeaderService Advertisement Protocol Establishing an IPX ConnectionSAP Broadcasts SAP Requests Server TypesRouting Information Protocol RIP/X OperationBridging and the IOLINK-PRO & 520 Routers RIP/X RequestsRIP/X Metrics Initial Bridging Process Station Address LearningAging Timer Address PurgingFilled Address Table Aging ExceptionIolink Router Feature Definitions TelnetLink Compression Introduction Point-to-Point WAN TopologiesBandwidth On Demand MultipointTime of Day Connect Application Disaster Recovery Backup Link Operating Software UpgradesIsdn Single Active Link & Dual Active Link Iolink PRO & 520 Isdn Connection Management Wide Area Network Topologies SupportedCall Establishment Methods Isdn Connection Management Auto-Call Time-of-Day ConnectionsAddress Connect Manual CallConnection Process CombinationSuspension Process Idle TimerProtocol Awareness Interesting TrafficSession Keepalive Messages Termination ProcessSuspension of TCP/IP Sessions IP SpecificsIP Address Connect RIP-Routing Information ProtocolSuspension of IPX Sessions IPX SpecificsRIP/IPX and SAP/IPX IPX Serialization FramesPinout Information Module IdentificationLink Clocking Information ATL CSU/DSU Link Module Information Link Interfaces ReferenceConsole Pinouts CSU/DSU Module T1/E1 Module24 & RS232C Link Pinouts RS232 Link Pinouts11 & X.21 Link Pinouts DB15 Female DTE Direction Contact Circuits From NumberRS442 & RS530 Link Pinouts DB25 Female DTE Direction Contact Circuit From Number NameLink Pinouts DB25Number Name RS232 Null-Modem Cable Configuration 11 RS232 Null-Modem CableNull-Modem Cable Configuration 12 V.35 Null-Modem CableRS530 Null-Modem Cable Configuration 13 RS530 Null-Modem CableRS530 To RS449 Conversion Cable 14 RS530 to RS449 Conversion Cable11/X.21 Null-Modem Cable Configuration 15 V.11/X.21 Null-Modem CableWAN Link Control-Signal Operation Appendix a Event Logs Event logsEvent Logs IOLINK-PRO & 520 Reference Manual A.3 Event Logs IOLINK-PRO & 520 Reference Manual A.5 Event Logs IOLINK-PRO & 520 Reference Manual A.7 Event Logs Alarm Logs Event Logs IOLINK-PRO & 520 Reference Manual A.11 Event Logs IOLINK-PRO & 520 Reference Manual A.13 Event Logs IOLINK-PRO & 520 Reference Manual A.15 Event Logs IOLINK-PRO & 520 Reference Manual A.17 Event Logs IOLINK-PRO & 520 Reference Manual A.19 PPP Security Logs MAC Address Filtering SecurityProgrammable Filtering Security-Filter if DestinationSecurity-Filter if Source Security-Forward if Destination Security-Forward if Source Programmable Filtering Pattern Filter Operators Bridge Pattern FilteringProtocol Discrimination Filter all IP Packets Protocol Type FieldInternet Protocol IP IP, and no moreFilter all IP without TCP traffic Transport Control Protocol / Internet Protocol TCP/IPFilter only TCP/IP Filter all except TCP/IPEthernet Broadcasting Bandwidth ConservationFilter all DEC Ethernet MulticastingGeneral Restrictions Internet AddressesEthernet Station Addresses Mask Combinations Mask would be 6-010203040506&12-0800&23-06 ExampleIP Router Pattern Filtering IPX Router Pattern FilteringPage Appendix C Frame Formats Octet Locations on an IP Routed TCP/IP Frame IOLINK-PRO & 520 Reference Manual C.3