Perle Systems 1700 manual Using This Manual

Page 3

Using This Manual

This Installation and Applications Guide provides the basic information required to initially set-up and configure the

P1730 & PRO Bridge/Router. This guide is organized into the following sections:

Installation” provides instructions for installing the P1730 & P1705.

Typical Applications & How to Configure Them” provides simple configuration examples for typical applications in which the P1705 & P1730 might be used. The applications described in this document are for example only and provide a method of quick configuration of the P1705 & P1730. The applications and corresponding configuration may be combined if the operation of the P1705 & P1730 requires more complexity. For more complete information on all of the configuration parameters available please refer to the appropriate Menu Reference Manual file for your operating software on the accompanying CD-ROM.

Introduction to Filtering” provides an introduction to the pattern filtering options of the P1705 & P1730. Several examples of typical pattern filters are also provided.

Menu Trees” provides a graphical tree type overview of the structure of the built-in menu system of the P1705 & P1730. All of the configuration is performed using the options provided in the menu system. The Menu Tree is like an index to the menu options.

Octet Locations on Ethernet Frames” provides a graphical representation of the various common Ethernet frames that the P1705 & P1730 will bridge or route. When defining a pattern filter, these frame displays indicate the offset values to use in order to define the pattern filter correctly.

Servicing Information” provides information on changing Link interfaces.

Interface Pinouts” provides information on Link interface connectors.

Using The Electronic Reference Manuals

This manual and the P1705 & P1730 Reference Manuals are provided as Adobe Acrobat PDF files on the accompanying CD-ROM.

The Adobe Acrobat Reader program required to view the Manuals is also loaded onto the CD-ROM. In addition, it is available for most computer operating platforms from Adobe on the Internet at: www.adobe.com.

The Reference Manual provides the following information:

Introduction to bridging, routing, and P1705 & P1730 features,

Pin out references for the link modules,

List of event and alarm logs, and

Expanded description of programmable filtering.

The PPP Menu Reference Manual provides the following information:

Complete description of the options for the built-in menu system, including PPP ISDN, PPP Leased Line, 1490 Frame Relay and encapsulated PPP Frame Relay.

Image 3
Contents Bridge / Routers User And System Administration Guide Federal Communications Commission FCC Using This Manual Contents Introduction to Filtering Appendix D Interface Pinouts Select a Site Unpack the RouterLocation of the Reset Hole on Router Identify the Reset SwitchIdentify the Connectors P1705P1730 Make the Link Connections Connect to the ConsoleManaging the P1705 & P1730 Using the Menus Power Up the Bridge/RouterOption Name ConventionsPassword Login to Bridge/Router and Enter the Required Configuration56/64 kbps T1 or E1Reserved As specifedFirst channel Number of channelsIsdn U Isdn S/T PPP Isdn Mandatory ConfigurationOff Identify the Status LEDsTypical Applications & How to Configure Them Bridging and Routing Should You Bridge or Route? Networks Bridged across a WAN link BridgingIP Address / Size of Subnet Mask IP RoutingIP Addressing IP Subnets MasksDefining an IP Subnet Mask IP Static Route IP Default GatewayNovell Servers in Both Locations IPX RoutingIPX Routed Local Area Networks Servers on one side Novell Servers in One Location OnlyIeee 802.2 Frames IPX RoutingEthernet-II Frames RAW 802.3 FramesNovell Server with Dual LANs IPX ForwardingSelect LAN1 or LAN2 Link IP address PPP Link ConfigurationPPP Overview Numbered LinksPeer IP address Unnumbered LinksMultilink Operation Basic Isdn Connections Basic WAN ConfigurationsSwitch Type Directory NumberSpid Console after a full reset Soft ResetPPP Isdn Manual Call Quick Connections IP Address / Subnet mask size Manual CallFrame Relay configuration Basic Frame Relay ConfigurationLink Speed Auto Learning the Frame Relay ConfigurationLMI Type Manual Configuration LMI TypePPP Enabled Quick Start Frame RelayIP Address / mask size Quick Start PPP Leased Line Connections Basic Leased Line ConfigurationBridge Connection Configure Remote Site Profiles Isdn Number Configure Remote Site Profiles for Isdn PPPEnabled Dlci Configure Remote Site Profile for Frame RelayªConfiguration WAN Set up Remote Site Set-up Remote Site AliasCIR Primary LinkEIR DisabledConfigure Remote Site Profiles for Leased Line PPP Site profile Schedule RecoveryConfigure Remote Site Profiles for PPPoE ªenabledLAN ªTCP mss value ª1452 ªPPPoE remote site alias ªISP provided usernameªIP Address / number of addresses Advanced FeaturesConfigure Dynamic Host Configuration Protocol ªServerIP address external DNS server IP address local DNS serverNetwork Address Translation and Port Translation Enter the private network IP address of each service offered11 Napt Configuration Configure PPP Security SecuritySecurity Level Incoming PAP Password Outgoing PAP PasswordIncoming Chap Secret Outgoing Chap Secret 13 Sample Firewall Application Configure FirewallFTP Server Enter ID# 1 for ISP remote siteInbound ID# 1 for ISP remote siteSource Mask Filter ID # Destination AddressDestination Mask Source AddressCompression Network Address TranslationFilters Bandwidth On Demand EnableLocation Main QOS Priority QueuingªPriority ªPriority List Number Simple Network Time Protocol Sntp ªenableªTime ªIP AddressMAC Address Filtering Introduction to FilteringNot Pattern FilteringIP & Related Traffic NetBIOS &NetBEUI Windows For WorkgroupsPopular Filters BridgeOther interesting TCP Ports NetBIOS over TCPIP Router BanyanAppendix a Menu Trees Menu Tree Menu Tree Octet Locations on a Bridged TCP/IP Frame Appendix B Octet Locations on Ethernet FramesConfiguration Pages Octet Locations Octet Locations on a Bridged XNS Frame Opening the case Appendix C Servicing InformationIdentifying the Internal Components To Clear a Lost Password Changing LAN or WAN InterfacesSelecting MDI or MDI-X LAN Interface Processor settings for the Isdn Link Modules Installing the Isdn Link ModulesChanging the Termination Straps on the Isdn S/T Interface Connecting to the ISDN-U Link ModulePerforming a Software Upgrade PC used for Tftp transfers Router a Router B Router C Pinout Information Link Clocking InformationATL-CSU/DSU Link Module Information Switches DB25 Female DCE Console PinoutsDB25 Female DTE 24 & RS232C Link PinoutsDB15 Female DTE 11/X.21 Link PinoutsDB25 Female DTE RS442 & RS530 Link PinoutsDCE Link PinoutsFigure D-9 RS232 Null-Modem Cable RS232 Null-Modem Cable ConfigurationFigure D 10 V-35 Null-Modem Cable Null-Modem Cable ConfigurationFigure D-11 RS530 Null-Modem Cable RS530 Null-Modem Cable ConfigurationFigure D-12 RS530 to RS449 Conversion Cable RS530 To RS449 Conversion CableFigure D-13 V.11/X.21 Null-Modem Cable 11/X.21 Null-Modem Cable Configuration