Perle Systems 1700 manual Site profile

Applications

Now that the remote site profile is created, a link number must be assigned as the primary

link number.	The primary link number is the link interface that the router will use to
attempt to establish a connection to the remote site PPP router.
Primary Link Number
	Location: Main
	ªConfiguration
	ª WAN Set up
	ª Remote Site Set-up
	ª Edit Remote Site
	ª Connection Set-up
	ª Primary Link
	The Primary Link number defined here is the link interface used to
	establish the connection to the remote site PPP router. When a link
	number is defined within a new remote site profile, that link number will
	be removed from any remote site profile that originally was defined to
	use the link. The link will then be used within the newly defined remote
	site profile.
	When this remote site profile is defined to use Multilink protocol, the
	Secondary Connection should also be defined.

The Bridge settings may now be configured within the Bridge Parameters menu.

The IP settings may now be configured within the IP Parameters menu.

The IPX settings may now be configured within the IPX Parameters menu.

The Compression settings may now be configured within the CCP Parameters menu.

The configuration options described here are only for initial set-up and configuration purposes. For more complete information on all of the configuration parameters available please refer to the PPP Menu Reference Manual file on the accompanying CD- ROM.

45