Applications
PPP Overview
Point to Point Protocol (PPP) is a connection protocol that allows control over the
PPP Link Configuration
A PPP connection between two routers may use a number of Network Control Protocols for communication. An IP router connection will use the Internet Protocol Control Protocol (IPCP) for all IP communications. An IPX router connection will use the Internet Packet Exchange Control Protocol (IPXCP) for all IPX communications.
In order to establish an IPCP or IPXCP link connection between two PPP routers, either a numbered link or an unnumbered link connection must be established. The two types of link connections are available to allow for greater flexibility between vendors products.
Numbered Links
A numbered link assigns a network address (either IP or IPX) to both ends of the WAN connection. In a numbered link configuration, the WAN connection may be viewed as another LAN network with the two PPP routers simply routing information between their local LANs and the common connected WAN network.
Because the WAN is considered a separate network, each of the stations on that network must be assigned a network address. If a numbered IP link is to be established, then each WAN interface must be assigned an IP address on a unique IP network. The WAN IP network address must be different from the two existing networks that are being connected together with the PPP routers.
Location: Main
ªConfiguration
ªConnections
ªRemote Site
ªEdit Remote Site
ªProtocol
ªIP Parameters
ªLink IP address
If a numbered IPX link is to be established, then each WAN interface must be assigned an IPX node address on a unique IPX network number. The WAN IPX network address must be different from the two existing networks that are being connected together with the PPP routers.
The IPX node address of the local WAN link is defined as the Local IPX Node within the remote site profile settings. The IPX address of the WAN link of the remote PPP router is defined as the Peer IPX Node within the remote site profile settings. The WAN IPX network number is defined with the IPX Net option in the remote site profile settings.
24